Drag from the left the relative AP densities for data, voice, and location services, and drop them under the
appropriate categories on the right.

Drag from the left the Cisco recommended design limits for hop count and ratio of MAP to RAP when
designing an indoor mesh network for voice and data, and drop them on to the appropriate category on the
right.

After having the kick-off meeting for a new site survey project with your customer, which three factors need to
be considered prior to beginning a WLAN site survey? (Choose three.)

Drag from the left the material type, and drop it under its relative attenuation level on the right.

Drag from the left the maximum power, and drop it under the appropriate UNII channel band regarding the
FCC domain when designing and deploying outdoor WLAN using 5 GHz.

Drag from the left the acceptable minimum call overlap for data and voice cells for site survey and deployment.

Drag from the left the minimum requirements needed for a location based survey and deployment and drop
them on the right.

Drag from the left the preferred parameters withoutexcess from location service survey and deployment, and
drop them on the right.

The customer has an existing 802.11b/g network withCisco 2500 controllers. The customer would like to
migrate to an 802.11a/b/g/n WLAN. Which network infrastructure issue might impact client performance in this
proposed controller-based solution?

You have a multinational customer that would like you to perform a wireless site survey for a new
manufacturing facility in Singapore. They have had a local vendor install a point-to-point wireless bridge link
between two buildings 1 km apart. The ground between the buildings is flat but because facilities are in the
mountains, dense fog is an issue. There are no lineof sight issues between the buildings. The link is
experiencing errors and throughput issues. Currently the two radios are set to operate at 2.4 GHz and the
transmit power is set to 7 dBm with 7 dBm antennas.What do you need to take into consideration when
performing the site survey for this link?