SIMULATION
Network Topology Exhibit

Domain.com is a stock broker service that is using EIGRP AS 1 as the IGP in its network. Domain.com has decided to establish connectivity between the New York site and the Los Angeles site. NiceNet, a service provider, has been selected by Domain.com to provide the connectivity between the two sites. For this implementation NiceNet is using a MPLS VPN solution. NiceNet has already established MPLS connectivity between all of its PE routers. MPBGP connectivity has also been established on all PE routers. Domain.com has successfully completed all necessary tasks on the CE routers, and NiceNet has **MISSING***.
The RD is 10:10.
The route target for import is 17:10.
The route target for export is 17:10.
Configure EIGRP between CE11A and PE11 using AS number 10. Redistribute from BGP to EIGRP AS 10 using a metric string of 10000 100 255 1 1500.
Redistribute from EIGRP AS 10 to BGP using metric string of 1. VPN is operational when you see the routes for both the local (10.1.11.0) and the remote (10.1.12.0) sites in the VRF routing table. Click on the host computer to start the simulation.

Network topology exhibit

Based on the exhibit, what is the correct BGP confederation required on Certkiller 4?

Exhibit

Based on the network diagram shown in the exhibit, what is the correct configuration on the customer edge router used to conditionally announce the customer networks to the ISP?

Exhibit

Given the following:
router bgp 65001
bgp confederation identifier 65101
——–
neighbor 10.3.3.5 remote-as 65001
neighbor 10.2.2.3 remote-as 65003
neighbor 10.1.1.2 remote-as 65002
neighbor 192.168.1.1 remote-as 65101
Based on the topology shown in the exhibit, what is the missing configuration statement required on CK4 to complete the BGP confederation configuration?

Exhibit
Neighbor 2.2.2.2 maximum-prefix 1000
What is the purpose of the BGP configuration command in the exhibit?

Exhibit:

How many and what kind of neighbors are configured on R2?

Exhibit

What will the configuration on Certkiller 3 accomplish (Choose three.)

Exhibit:

Based on the network topology shown in the exhibit, which routers should be configured as route reflectors but also act as clients to other router reflectors to provide the most scalable solution?

Exhibit:’

Given the following configuration for Certkiller 2:
! output omitted
!
hostname Certkiller 2
!
interface loopback 0
ip address 2.2.2.2
!
interface e0
ip address 10.1.1.1 255.255.255.0
!
router bgp 65101
neighbor 172.16.1.1 remote-as 65100
neighbor 3.3.3.3 remote-as 65101
no sync
!
router eigrp 101
network 10.0.0.0
network 2.0.0.0
When Certkiller 2 sends the TCP SYN packet to Certkiller 3 to establish the IBGP session, what will be the source IP address of the TCP SYN packet from Certkiller 2 to Certkiller 3?

Network topology exhibit.

Why would Certkiller 2 accept or reject the BGP update from Certkiller 13 about the 172.0.0.0/8 prefix?