which matching routes will be set to a weight of 150?
Based on the show route-map test output shown in the exhibit, which matching routes will be set to a weight of 150?
Which statement is true?
Exhibit:
R2 is configured to prepend AS number 65102 in updates to R3.
Which statement is true?
Which configuration will set the local preference for the 172.16.10.0
Which configuration will set the local preference for the 172.16.10.0/24 prefix to 200 and allow all others prefixes from the 10.1.1.1 BGP neighbor to use the default local preference?
Which of the following is the correct set of commands to establish a minimum routing update interval of 60 sec
Exhibit:
(output omitted)
!
router bgp 65500
neighbor 172.25.25.25 remote-as 65501
neighbor 172.22.22.25 remote-as 65502
neighbor 172.23.23.22 remote-as 65503
!
(output omitted)
You work as a network technician at Domain.com. Study the exhibit carefully. Which of the following is the correct set of commands to establish a minimum routing update interval of 60 seconds for all neighbors?
What is the result of the command in the exhibit?
Exhibit:
ip tcp path-mtu-discovery age-timer infinite
What is the result of the command in the exhibit?
What could be the cause of this problem?
Exhibit:
Given the following configurations, Certkiller 2 and Certkiller 3 are not able to successfully establish the IBGP session using the loopback 0 interface.
What could be the cause of this problem?
!
! output omitted
!
hostname Certkiller 2
interface lo 0
ip address 2.2.2.2
!
interface e0
ip address 10.1.1.1 255.255.255.0
no shut
!
interface e1
ip address 10.2.2.1 255.255.255.0
no shut
!
router bgp 65101
neighbor 172.16.1.1 remote-as 65100
neighbor 3.3.3.3 remote-as 65101
neighbor 3.3.3.3 update-source loopback0
!
router eigrp 101
network 10.0.0.0
!
! output omited
!
hostname Certkiller 3
!
interface lo 0
ip address 3.3.3.3
!
interface e0
ip address 10.1.1.2 255.255.255.0
no shut
!
interface e1
ip address 10.2.2.2 255.255.255.0
no shut
!
router bgp 65101
neighbor 192.168.1.1 remote-as 65102
neighbor 2.2.2.2 remote-as 65101
neighbor 2.2.2.2 update-source loopback0
!
router eigrp 101
network 10.0.0.0
!
Exhibit:
Exhibit:
AS-Path prepending is used in AS1 in order to influence the return traffic from AS 4 to AS 1 through the higher speed path via AS 3. _____ needs to be configured for AS-Path prepending and a minimum of ____ of the AS number should be prepended.
Exhibit:
Exhibit:
Complete the following Certkiller 1 BGP configuration to load balance the traffic from AS 65101 to AS 65102 if two identical EBGP routes are learned from AS 65102.
hostname Certkiller 1
!
router bgp 65101
neighbor 10.1.1.2 remote-as 65102
neighbor 10.2.2.2 remote-as 65102
Which two configuration commands will complete the configuration on Certkiller 1 so that when Certkiller 1 sen
Network topology exhibit
Exhibit #2
Which two configuration commands will complete the configuration on Certkiller 1 so that when Certkiller 1 send the BGP updates to Certkiller 4, three copies of the customer’s AS number (65103) willb e prepended to the AS-Paht? (Choose two)
What happens to the packet from AS 65101 to AS 65103?
Exhibit:
There is no direct physical connectivity between Certkiller 3 and Certkiller 5. The Transit AS 65102 is only running partial-meshed IBGP between Certkiller 3 and Certkiller 5 and is using OSPF as its IGP. Both Certkiller 3 and Certkiller 5 are using the next-hop-self options. The external BGP routes are not being redistributed into OSPF. BGP synchronization is disabled.
What happens to the packet from AS 65101 to AS 65103?