In SONET, as a percentage of traffic Overhead is fixed at:
In SONET, as a percentage of traffic Overhead is fixed at:
What is the maximum theoretical provisionable bandwidth of the updated 15454 ANSI shelf?
What is the maximum theoretical provisionable bandwidth of the updated 15454 ANSI shelf?
If this router has a configuration-register setting of 0x102, select the proper boot sequence
Click the Exhibit button to view the confiuration.
Look at the router configuration above. If this router has a configuration-register setting of 0x102, select the proper boot sequence:
what does Unidirectional indicate?
In a Unidirectional 1+1 MSP, what does Unidirectional indicate?
The router will:
A router is set to boot from flash, but cannot find boot commands in the configuration. Also, valid files do not exist in the default flash device. The router will:
how long does spanning tree protocol interrupt connectivity before it converges?
Click the Exhibit button to view the topology.
As shown in the diagram, a building in your campus network has two layer 3 switches in the distribution layer and four layer 2 switches in the wiring closets. The layer 3 switches are labeled R1 and R2. The layer 2 switches are labeled A1, A2, A3, and A4. Access switch A1 is configured as the root switch of VLAN 1. Each access switch has a single subnet and the uplinks are configured as access ports, not VLAN trunks. If the uplink labeled X is cut, how long does spanning tree protocol interrupt connectivity before it converges?
What CTM component will provide this functionality?
A network operator wants to have a continuous view of network alarms as they occur. What CTM component will provide this functionality?
Which are correct timing configurations for 7600 interfaces (A) and (B)?
Click the Exhibit button.
The exhibit shows OC-12 POS connections across various transport media. Which are correct timing configurations for 7600 interfaces (A) and (B)? (Note: connection between routers B and C is set to internal timing.)
How do FCIP and ISCSi differ?
How do FCIP and ISCSi differ?
What is the destination MAC address of the packet on Host’s 1 Ethernet?
Click the Exhibit button to view the topology.
Host 1 and Host 2 are on Ethernet LANs in different buildings. A serial line is installed between two Cisco routers using Cisco HDLC serial line encapsulation. Routers A and B are configured to route IP traffic. Host 1 sends a packet to Host 2. What is the destination MAC address of the packet on Host’s 1 Ethernet?
