Look at the following configuration below and select the statements that are true?
RD2(config)#router ospf 100
RD2(config-router)# distance 180 10.1.10.1 0.0.0.0 match-me
RD2(config-router)#!
RD2(config-router)#ip access-list standard match-me
RD2(config-std-nacl)# permit host 172.16.0.0
Choose two.

SIMULATION
EIGRP OSPF Redistribution Sim
R2 is an ASBR for EIGRP 100 and OSPF AREA 24
R3 is an ASBR for EIGRP 100 and OSPF AREA 34
[note: so there are TWO separate areas on TWO separate ASBRS
thus you need to do redistribution on R2 and R3 R1 is ONLY in EIGRP 100, and is THE
ONLY router you can ping from. R4 has a loopback interface that must be pinged from R1.
R4 is running OSPF and has redundant link to EIGRP network over R3 router.
Notice: You should make a ping from R1 to 172.16.100.1 network to make sure everything is
working correctly.

The company and the company network have both been growing rapidly. Multiple adds,
moves and changes have been applied to the network. Your boss has asked you to
troubleshoot a recent OSPF synchronization problem that has arisen. There have been
synchronization problems at separate locations in the OSPF area 0. There have been
reported link failures during the rapid growth of the company network. You are required to
resolve the OSPF problem. OSPF must be able to converge when the network changes.

Refer to the information above to answer the following question.
Examine the following excerpt from the “show ip ospf” command on D1:

Based on the information shown above, what is most likely causing the different missing
routes throughout the network?

The company and the company network have both been growing rapidly. Multiple adds,
moves and changes have been applied to the network. Your boss has asked you to
troubleshoot a recent OSPF synchronization problem that has arisen. There have been
synchronization problems at separate locations in the OSPF area 0. There have been
reported link failures during the rapid growth of the company network. You are required to
resolve the OSPF problem. OSPF must be able to converge when the network changes.

Refer to the information above to answer the following question.
Which configuration command on D1 (with a similar command on D2) will provide an
immediate solution to the missing route problem?

The company and the company network have both been growing rapidly. Multiple adds,
moves and changes have been applied to the network. Your boss has asked you to
troubleshoot a recent OSPF synchronization problem that has arisen. There have been
synchronization problems at separate locations in the OSPF area 0. There have been
reported link failures during the rapid growth of the company network. You are required to
resolve the OSPF problem. OSPF must be able to converge when the network changes.

Refer to the information above to answer the following question.
The log of d1 reports the following:

This event was anticipated due to maintenance; however, it resulted in excessive lost routes.
Which route should be the only one removed from the routing tables of the routers?

The company and the company network have both been growing rapidly. Multiple adds,
moves and changes have been applied to the network. Your boss has asked you to
troubleshoot a recent OSPF synchronization problem that has arisen. There have been
synchronization problems at separate locations in the OSPF area 0. There have been
reported link failures during the rapid growth of the company network. You are required to
resolve the OSPF problem. OSPF must be able to converge when the network changes.

Refer to the information above to answer the following question.
The R2 router has lost connectivity to R1. The following is R1 ′s current route table:

Which expected route is missing from R1′s route table based on the topology during the
maintenance period?’

Refer to the exhibit.

Router RIP is attempting to establish BGP neighbor relationships with
routers RT1 and RT3. On the basis of the information that is presented in the exhibit, which
two statements are true? (Choose two)

BGP contains two paths to a destination. Assuming both routes were originated locally and
have an equal weight. what will be the next determining factor in choosing the best path?

Which two reductions are the correct reductions of the IPv6 address
2001:0d02:0000:0000:0014:0000:0000:0095? (Choose two)

Refer to the exhibit.

The 6to4 overlay tunnel configuration has been applied on each router
to join isolated IPv6 networks over a IPv4 network.
Which statements regarding the 6to4 overlay tunnel is true?