You want to configure Cisco ISE as a SCEP proxy to a Microsoft Windows 2008 R2 Server root CA. Which of
the following also needs to be configured? (Select the best answer.)

Which of the following is primarily true of SEM systems? (Select the best answer.)

To ease administrative overhead, you want to add a third party feed to a Security Intelligence device so that the
IP addresses of known malicious hosts are automatically blacklisted. However, you have not determined
whether the feed is valid.
Which of the following are you most likely to do? (Select the best answer.)

You create a static pointtopoint VTI tunnel on RouterA. Afterward, you issue the show runningconfig commandand receive the following output:

Which of the following is the authentication transform that will be used by the static VTI tunnel? (Select the best
answer.)

Which of the following best describes the purpose of SNMP? (Select the best answer.)

Which of the following is least likely to be considered an advanced persistent threat? (Select the best answer.)

Which of the following indicates that aggressive mode ISAKMP peers have created SAs? (Select the best
answer.)

Router2 is configured to obtain time from three different NTP servers. You want to determine from which of the
three servers Router2 is currently synchronizing time.
Which of the following commands would not achieve your goal? (Select the best answer.)

In which of the following authentication protocols is support for TLS 1.2 specifically required? (Select the best
answer.)

The Serial 0/0 interfaces on Router1 and Router2 are directly connected on the 192.168.51.48/30 network. You
issue the following commands on Router1:
interface serial 0/0 ip ospf
messagedigestkey 1 md5 b0s0n router
ospf 1routerid 1.1.1.1 network
10.10.10.0 0.0.0.255 area 1 network
192.168.51.48 0.0.0.3 area 0 area 0
authentication
You issue the following commands on Router2:
interface serial 0/0 ip ospf
authenticationkey b0s0n router
ospf 2routerid 2.2.2.2 network10.10.20.0 0.0.0.255 area 2
network 192.168.51.48 0.0.0.3
area 0 area 0 authentication
Router1 and Router2 do not form an OSPF adjacency.
Which of the following is most likely the problem? (Select the best answer.)