What three actions will the switch take when a frame wi…
Which of these correctly describes the results of port …
What is the result of the above configuration being app…
The following configuration is applied to a Layer 2 Switch:
interface fastethernet 0/4
switchport mode access
switchport port-security
switchport port-security mac-address 0000.1111.1111
switchport port-security maximum 2
swithcport port-security
What is the result of the above configuration being applied to the switch?
Which command enables IPv6 forwarding on a Cisco router?
Which command enables IPv6 forwarding on a Cisco router?
what order does it pass through each state?
When a router undergoes the exchange protocol within OSPF, in what order does it pass through each state?
what could be the problem?
What action does the router take?
what is the TTL value for that ping?
What will the router consider the most reliable informa…
A router receives information about network 192.168.10.0/24 from multiple sources. What will the router consider the most reliable information about the path to that
network?
What path will packets take from a host on 192.168.10.1…
Refer to the exhibit.
The company uses EIGRP as the routing protocol. What path will packets take from a host on 192.168.10.192/26 network to a host on the LAN attached to router
R1?
R3# show ip route
Gateway of last resort is not set
192 168.20.0/24 is variably subnetted, 6 subnets, 2 masks D 192.168.20.64/26 [90/2195456] via 192.168.20.9, 00:03:31, Serial0/0 D 192.168.20.0/30 [90/2681856]
via 192.168.20.9, 00:03:31, Serial0/0 C 192.168.20.4/30 is directly connected, Serial0/1
C 192.168.20.8/30 is directly connected, Serial0/0
C 192.168.20.192/26 is directly connected, FastEthernet0/0 D 192.168.20.128/26 [90/2195456] via 192.168.20.5,00:03:31, Serial0/1