The VPN named my_vpn is operating on interface s0/0 of a PE-router. The CE-PE routing protocol is BGP. The MPLS backbone IGP is OSPF. How should you verity routing information is being exchanged between the PE-routers that support this VPN?

Which IOS show command can be used to examine all the routes that have been redistributed into MP-BGP?

The VPN called my_vpn is operating on interface s0/0 of a PE-router. The CE-PE routing protocol is RIP. The MPLS backbone IGP is OSPF. How could you verify that the routes received from the remote CE-router are being redistributed into RIP?

Which IOS command should you use to list routers in an LSR’s adjacency table?

The VPN named my_vpn is operating on interface s0/0 of a PE-router. The RD is 65000:101. The CE-PE routing protocol is RIP. The MPLS backbone IGP is OSPF. Which command should be used to display all labels associated with this VPN?

Which two commands are needed to define an MPLS VPN routing context in RIP for VPN my_vpn? (Choose two.)

A PE router is running EIGRP with its MPLS VPN customer. What is wrong with the following EIGRP configuration on the PE router? router eigrp 100
address-family ipv4 vrf Certkiller vpn
network 10.0.0.0
redistribute bgp 65100 metric 10000 100 255 1 1500
! output omitted

In the set extcommunity rt 123:750 additive command, what does the parameter additive do?

Which command configures the propagation of a static VRF route between PE-routers?

When redistributing routes from MP-BGP to OSPF, which three are loop prevention mechanisms? (Choose three)