Which show command will display only the Type 5 LSAs in the OSPF topology database?
Which show command will display only the Type 5 LSAs in the OSPF topology database?
Select the best response.
Which BGP path attribute is Cisco proprietary?
Which BGP path attribute is Cisco proprietary?
Select the best response.
Which BGP attribute is used by BGP to prevent routing loops?
Which BGP attribute is used by BGP to prevent routing loops?
Select the best response.
What is the reason the 192.168.0.0 route is not being advertised?
The 192.168.0.0 network is not being propagated throughout the network. Observe the BGP configuration commands from the advertising router. What is the reason the 192.168.0.0 route is not being advertised?
router bgp 65111
neighbor 172.16.1.1 remote-as 65111
neighbor 172.16.2.1 remote-as 65112
network 192.168.0.0
network 10.0.0.0
!
ip route 192.168.0.0 255.255.0.0 null0
Select the best response.
Which OSPF configuration command is required to configure Area 3 as a totally stubby area?
Refer to the diagram. Which OSPF configuration command is required to configure Area 3 as a totally stubby area?
Select the best response.
Which three are characteristics of IPv6?
Which three are characteristics of IPv6? (Choose three.)
Select 3 response(s).
what is one of the most common problems?
When other routing protocol routes are being redistributed into OSPF, what is one of the most common problems?
Select the best response.
which statement is true?
The Dev-1 and Dev-3 routers are OSPF neighbors over the Ethernet 0/0 connection. Based on the show ip ospf neighbor output from the Dev-1 and Dev-3 routers, which statement is true?
Select the best response.
What will happen when RTA comes back online?
During a recent OSPF election among three routers, RTA was elected the DR and RTB was elected the BDR, as seen in the graphic. Assume that RTA fails, and that RTB takes the place of the DR while RTC becomes the new BDR. What will happen when RTA comes back online?
Select the best response.
which additional command is needed to redistribute IGRP into EIGRP?
Given the accompanying output, which additional command is needed to redistribute IGRP into EIGRP?
Router eigrp 123
Network 10.10.10.0
No auto-summary
!
Router igrp 123
Network 172.16.0.0
Network 172.17.0.0
Select the best response.