What command configures the amount of time CBAC will wait for a TCP session to become established before dropp
Mark for Re vie
What command configures the amount of time CBAC will wait for a TCP session to become
established before dropping the connection in the state table?
Which one of the following Cisco IOS VPN features simplifies IPsec VPN configuration and design by use…?
Which one of the following Cisco IOS VPN features simplifies IPsec VPN configuration and design
by use of on-demand virtual access interfaces cloned from a virtual template configuration?
What can you determine based on the following configuration?
You are the Cisco Configuration Assistant in your company. What can you determine based on the
following configuration?
Crypto ipsec transform-set MINE esp-des
!
Crypto map MYMAP 10 ipsec-isakmp
Set peer 172.30.5.2
Set transform-set MINE
Match address 101
Which option is correct about the output of the Cisco IOS IPS configuration displayed in the following exhibit
How do you configure the CBAC global UDP idle session timeout?
You have been tasked with setting up a new router with CBAC. How do you configure the CBAC
global UDP idle session timeout?
which traffic can be passed between the client PC and the Cisco Catalyst switch over the uncontrolled port?
While deploying S02.1X authentication on Cisco Catalyst switches, which traffic can be passed
between the client PC and the Cisco Catalyst switch over the uncontrolled port?
How do you set the threshold of half-open sessions CBAC will allow per minute before deleting them?
You have been tasked with setting up a new Company router with CBAC. How do you set the
threshold of half-open sessions CBAC will allow per minute before deleting them?
which additional configuration parameter is required under the GET VPN group member GDOI configuration?
Which TCP port would you use to access the Cisco ACS web interface?
You are the Cisco Configuration Assistant in your company. Which TCP port would you use to
access the Cisco ACS web interface?
Which action can be enabled by the interface configuration command switchport protected?
Which action can be enabled by the interface configuration command switchport protected?