Which four of the following options are Cisco-supported IP telephony deployment models?

MGCP use which call control model?

If you are required to configure a router to use MGCP on a digital port, which measure will you
take?

Look at the following exhibit carefully.

You can click the Voice Gateway for the BR2 location to see the output from the debug voice ccapi
inout command and click on 10.1.5.10 to view and search the trace file output. You can also enter
a string in the Search box and click the Find button to search the output. X can be clicked to back
to the item.
As a network technician, you have recently configured a trunk between the Cisco Unified
CallManager cluster at 10.1.5.10 and a CME at a 10.3.130.1. However, in the testing of this
configuration, you discover that you cannot complete any call when dialing from ext. 2020 to
ext.4001 or from ext.4001 to ext.2020. Please choose the most possible reason from the following
statements.

As a network technician, you should be familiar with various commands. Which command displays
a count of successful and unsuccessful control commands?

In a SIP direct call setup, which message will be sent by the originating UAC to the UAS of the
recipient?

Which two of the following signaling protocols are peer-to-peer protocols? (Select two.)

Look at the following exhibit carefully.

You can click on the GK icon to view the output of the show gatekeeper endpoint command and
click on each voice gateway to view the interface configuration. X of each popup can be clicked to
back to the item.
As a network technician, you are recently responsible for configuring a gatekeeper with three local
zones called East, West and EMEA. You have accomplished this task. In the East and EMEA
zones, CallManager and the gateways are all registered in the West Zone, however, each of them
should be registered in their own zone. In order to fix this issue, which measure should you take?

Look at the following exhibit carefully.

You can click the Voice Gateway for the BR2 location to see the output from the debug voice ccapi
inout command and click on 10.1.5.10 to see and search the trace file output. You can also enter a
string in the Search box and click the Find button to search the output. X can be clicked to back to
the item.
As a network technician, you have recently configured a trunk between the Cisco Unified
CallManager cluster at 10.1.5.10 and a CME at a 10.3.130.1. In the testing of this configuration,
you discover that you can complete calls when dialing from ext.2020 to ext.4001, however, a fast
busy can only be received when dialing from ext.4001 to ext.2020.
Please choose the most possible reason of this issue from the following statements.

In a Cisco UCM single-site deployment, please choose the maximum number of IP phones that
can register with a UCM cluster.