A co-worker is developing an implementation plan for a design that uses OSPF 2 and RIPv2
routing domains, with two routers redistributing between the two domains.
The co-worker asks your help in choosing how to prevent domain loops by setting
administrative distance. Assuming all other related settings use defaults, which of the
following would solve the domain loop problem?

Router R1 sets a route tag for subnet 10.1.1.0/24 when redistributing from OSPF into
EIGRP. Which of the following unit is assigned to the route tag?

Policy-Based Routing (PBR) has been enabled on Router R1’s interface F0/0. Which of the
following is true regarding how PBR works? (Choose two.)

Examine the following configuration on Router R1. R1’s show ip route 172.16.4.1 command
lists a route with outgoing interface S0/1/1. Host 172.16.3.3 uses telnet to connect to host
172.16.4.1. What will Router R1 do with the packets generated by host 172.16.3.3 because
of the telnet, assuming the packets enter R1’s F0/0 interface?
(Choose two.)
interface Fastethernet 0/0
ip address 172.16.1.1 255.255.255.0
ip policy route-map Q2
!
route-map Q2 permit
match ip address 101
set interface s0/0/1
!
access-list 101 permit tcp host 172.16.3.3 172.16.4.0 0.0.0.255

The following output occurs on Router R2. Which of the following statements can be
confirmed as true based on the output from R2?
R2# show ip policy
Interface Route map
Fa0/0 RM1
Fa0/1 RM2
S0/0/0 RM3

Which of the following are examples of traffic that can be created as part of an IP ServiceLevel Agreement operation? (Choose two.)

The following configuration commands exist only in an implementation plan document.
An engineer does a copy/paste of these commands into configuration mode on Router R1.
Which of the following answers is most accurate regarding the results?
ip sla 1
icmp-echo 1.1.1.1 source-ip 2.2.2.2
ip sla schedule 1 start-time now life forever

The following output occurs on Router R1. IP SLA operation 1 uses an ICMP echo operation
type, with default frequency of 60 seconds. The operation pings from address
1.1.1.1 to address 2.2.2.2. Which of the following answers is true regarding IP SLA and
object tracking on R1?
R1# show track
Track 2
IP SLA 1 state
State is Up
3 changes, last change 00:00:03
Delay up 45 secs, down 55 secs
Latest operation return code: OK
Latest RTT (millisecs) 6
Tracked by:
STATIC-IP-ROUTING 0

Which of the following are considered private IPv4 addresses? (Choose two.)

Class C network 200.1.1.0/24 was allocated to an ISP that operated primarily in Asi