Which two statements about route redistribution when implementing OSPF are true?
(Choose two.)
Select 2 response(s).

Which two routing interface parameters are supported in OSPF implementations? (Choose two.)
Select 2 response(s).

Refer to the exhibit.

A new TAC engineer comes to you for advice. The engineer wants to
configure RIPv2-OSPF two-way redistribution while avoiding routing loops. Which two
additions to the router B1 configuration should the engineer make? (Choose two.)
Select 2 response(s).

You want the redistributed EIGRP AS 10 routes to have an administrative distance of 121
when they appear as RIP routes in the routing table of A1.

Which command should you use on a router to accomplish this goal? Select the best response.

Refer to the exhibit.

In a redundant hub-and-spoke deployment using EIGRP, what feature
can be used to ensure that routers C through F are not used as transit routers for data
traveling from router B to network 10.1.1.0? Select the best response

ACME Rocket Sleds is growing, and so is their network. They have determined that they can
no longer continue using static routes and must implement a dynamic routing protocol. They
want to have data use multiple paths to the destinations, even if the paths are not equal cost.
Which routing protocol has the ability to do this? Select the best response.

Refer to the exhibit.

ROUTE Enterprises has many stub networks in their enterprise network,
such as router B and its associated network. EIGRP is to be implemented on router A so that
neither the prefix for the S/0/0/0 interface nor the prefixes from router B appear in the routing
tables for the router in the enterprise network. Which action will accomplish this goal?
Select the best response.

Refer to the exhibit.

Which statement about dynamic routing protocols for this network is true?
Select the best response.

After implementing EIGRP on your network, you issue the show ip eigrp traffic command on
router C. The following output is shown:
RouterC#show ip eigrp traffic
IP-EIGRP Traffic Statistics for process 1
Hellos sent/received: 481/444
Updates sent/received: 41/32
Queries sent/received: 5/1
Replies sent/received: 1/4
Acks sent/received: 21/25
Input queue high water mark 2, 0 drops
SIA-Queries sent/received: 0/0
SIA-Replies sent/received: 0/0
Approximately 25 minutes later, you issue the same command again. The following output is
shown:
RouterC#show ip eigrp traffic
IP-EIGRP Traffic Statistics for process 1
Hellos sent/received: 1057/1020
Updates sent/received: 41/32
Queries sent/received: 5/1
Replies sent/received: 1/4
Acks sent/received: 21/25
Input queue high water mark 2, 0 drops
SIA-Queries sent/received: 0/0
SIA-Replies sent/received: 0/0
Approximately 25 minutes later, you issue the same command a third time. The following
output is shown:
RouterC#show ip eigrp traffic
IP-EIGRP Traffic Statistics for process 1
Hellos sent/received: 1754/1717
Updates sent/received: 41/32
Queries sent/received: 5/1
Replies sent/received: 1/4
Acks sent/received: 21/25
Input queue high water mark 2, 0 drops
SIA-Queries sent/received: 0/0
SIA-Replies sent/received: 0/0
What can you conclude about this network?
Select the best response.

After implementing EIGRP on your network, you issue the show ip eigrp traffic command on
router C. The following output is shown: RouterC#show ip eigrp traffic IP-EIGRP Traffic
Statistics for process 1
Hellos sent/received: 2112/2076
Updates sent/received: 47/38
Queries sent/received: 5/3
Replies sent/received: 3/4
Acks sent/received: 29/33
Input queue high water mark 2, 0 drops
SIA-Queries sent/received: 0/0
SIA-Replies sent/received: 0/0
Moments later, you issue the same command a second time and the following output is
shown: RouterC#show ip eigrp traffic
IP-EIGRP Traffic Statistics for process 1
Hellos sent/received: 2139/2104
Updates sent/received: 50/39
Queries sent/received: 5/4
Replies sent/received: 4/4
Acks sent/received: 31/37
Input queue high water mark 2, 0 drops
SIA-Queries sent/received: 0/0
SIA-Replies sent/received: 0/0
Moments later, you issue the same command a third time and the following output is shown:
RouterC#show ip eigrp traffic
IP-EIGRP Traffic Statistics for process 1
Hellos sent/received: 2162/2126
Updates sent/received: 53/42
Queries sent/received: 5/5
Replies sent/received: 5/4
Acks sent/received: 35/41
Input queue high water mark 2, 0 drops
SIA-Queries sent/received: 0/0
SIA-Replies sent/received: 0/0
What information can you determine about this network? Select the best response.