what is the correct BGP confederation required on Certkiller 4?
Network topology exhibit
Based on the exhibit, what is the correct BGP confederation required on Certkiller 4?
what is the correct configuration on the customer edge router used to conditionally announce the customer netw
Exhibit
Based on the network diagram shown in the exhibit, what is the correct configuration on the customer edge router used to conditionally announce the customer networks to the ISP?
what is the missing configuration statement required on CK4 to complete the BGP confederation configuration?
Exhibit
Given the following:
router bgp 65001
bgp confederation identifier 65101
——–
neighbor 10.3.3.5 remote-as 65001
neighbor 10.2.2.3 remote-as 65003
neighbor 10.1.1.2 remote-as 65002
neighbor 192.168.1.1 remote-as 65101
Based on the topology shown in the exhibit, what is the missing configuration statement required on CK4 to complete the BGP confederation configuration?
What is the purpose of the BGP configuration command in the exhibit?
Exhibit
Neighbor 2.2.2.2 maximum-prefix 1000
What is the purpose of the BGP configuration command in the exhibit?
what kind of neighbors are configured on R2?
Exhibit:
How many and what kind of neighbors are configured on R2?
ExhibitWhat will the configuration on Certkiller 3 accomplish (Choose three.)
Exhibit
What will the configuration on Certkiller 3 accomplish (Choose three.)
which routers should be configured as route reflectors but also act as clients to other router reflectors to p
Exhibit:
Based on the network topology shown in the exhibit, which routers should be configured as route reflectors but also act as clients to other router reflectors to provide the most scalable solution?
what will be the source IP address of the TCP SYN packet from Certkiller 2 to Certkiller 3?
Exhibit:’
Given the following configuration for Certkiller 2:
! output omitted
!
hostname Certkiller 2
!
interface loopback 0
ip address 2.2.2.2
!
interface e0
ip address 10.1.1.1 255.255.255.0
!
router bgp 65101
neighbor 172.16.1.1 remote-as 65100
neighbor 3.3.3.3 remote-as 65101
no sync
!
router eigrp 101
network 10.0.0.0
network 2.0.0.0
When Certkiller 2 sends the TCP SYN packet to Certkiller 3 to establish the IBGP session, what will be the source IP address of the TCP SYN packet from Certkiller 2 to Certkiller 3?
Why would Certkiller 2 accept or reject the BGP update from Certkiller 13 about the 172.0.0.0/8 prefix?
Network topology exhibit.
Why would Certkiller 2 accept or reject the BGP update from Certkiller 13 about the 172.0.0.0/8 prefix?
On the Certkiller 3 router:
SIMULATION
Network topology exhibit
Domain.com recently issued a contract to ISP (AS 65020) to provide a second Internet connection their Boston location. A new router, Certkiller 3, will need to be configured to connect to the Internet Service Providers. It is necessary to configure this router to exchange routes with both ISPs, and to filter the routing advertisements out to the ISPs. The basic configuration for the new router has been entered. It is only necessary to complete the BGP configuration steps outlined below.
On the Certkiller 3 router:
Configure BGP to exchange routes with ISP-A (AS 65010). Configure BGP to exchange routes with ISP-B (AS 65020). Only announce the two local Ethernet LAN prefixes (172.16.1.0/24 and 172.16.2.0/24) to the ISPs.
Configure the appropriate as-path access-list to permit only locally originated routes to be advertised in outbound routing updates to the ISPs. Use as-patch ACL number 10 containing only one statement. Start the simulation by clicking on the local host icon.