In BGP, why should a Route Reflector be used?

A router is receiving updates for a subnet from different routing protocols. The administrator wishes to take advantage of a path via a route with a less favorable Administrative Distance. What can be done to effect this without losing any of the updates?

Routers E and F are configured for HSRP (Hot Standby Routing Protocol). E has a priority of 100, while F has a priority of 50. At one point, when E is the active router, it fails, and F takes over as the active router. A few minutes later, E returns to service. What happens?

Find the problem in the following configuration:vpdn enablevpdn-group 1request-dialinprotocol pppoevirtual-template 2!interface atm 2/0.1 point-to-pointpvc 0/101encapsulation aal5snapprotocol pppoe!interface atm 2/0.2 point-to-pointpvc 0/102encapsulation aal5snapprotocol pppoe!interface atm 2/0.3 point-to-pointpvc 0/103encapsulation aal5snapprotocol pppoe!interface virtual-template 2ip unnumbered Fastethernet 4/0!interface FastEthernet 4/0ip address 172.22.32.1 255.255.255.0

What VCI value is reserved for PNNI ATM routing?

The following configuration is entered on an ATM interface:interface atm 0/0/0encapsulation aal5mux ppp virtual-template 1interface atm 0/0/0.10 multipointpvc 0/100exitpvc
0/101encapsulation aal5snapWhat will the encapsulation type for the PVCs be?

The ATM Transmission Convergence Sublayer is NOT responsible for:

What is the function of NSP Cross-Connections in the usage of a 6400 in a production network. (multiple answer)

ATM carries IP and PPP information within ATM cells. What ATM Adaptation Layer is used when an ATM cell carries IP packets and PPP frames?

A PVC has been configured on the 6400 NRP as follows:pvc
1/100encapsulation aal5mux ppp virtual-template 1ubr 384What does the command “ubr 384” accomplish?