When a subscriber is configured for PPPoE service, the DSL modem is usually configured as:
When a subscriber is configured for PPPoE service, the DSL modem is usually configured as:
What information does the CPE receive from the NRP via PPP IPCP negotiation?
Inferface FastEthernet 0/0/0ip address 192.168.1.1 255.255.255.0!interface ATM 0/0/0.30 multipointpvc 1/43encapsulation aal5ciscoppp Virtual-Template 2!!interface Virtual-Template 2ip unnumbered FastEthernet 0/0/0no peer default ip addressppp authentication pap chapppp ipcp mask 255.255.255.224!Refer to the configuration above. A customer connected to PVC 1/43 boots their CPE (PPPoA encapsulation). The Radius server is properly configured and recognizes the customer. The Radius server assigns the Framed-IP-netmask 192.168.10.1/29. What information does the CPE receive from the NRP via PPP IPCP negotiation?
What is the purpose of the following command?
What is the purpose of the following command? virtual-template {template-number}pre-clone {number}
What does the Service Selection Gateway (SSG) feature on the NRP support to authenticate and authorize users?
What does the Service Selection Gateway (SSG) feature on the NRP support to authenticate and authorize users?
What is the likely cause of the problem?
A Network Administrator is unable to configure a PVC with the value of 8/49. He looks at the running config and notices the following entry for the interface he is working with. What is the likely cause of the problem?interface ATM0/0/0no ip addressatm vc-per-vp 2048no atm ilmi-keepalive
What statement regarding Service Selection Gateway is INCORRECT?
What statement regarding Service Selection Gateway is INCORRECT?
Which numbers below, correctly fill in the blanks?
Virtual path identifier (VPI) and virtual channel identifier (VCI) values on the NRP-2 must share ___bits. By default, VPI values are limited to ___ bits (0-15), and VCI values are limited to ___ bits (0-1023). A Network Administrator can change the VPI and VCI ranges, but together the VPI and VCI values cannot exceed ___ bits. Which numbers below, correctly fill in the blanks?
what type of negotiation?
An architecture that utilizes PPPoA deals with IP address allocation by what type of negotiation?
which occur during user authentication?
According to the diagram, a PPPoE session is initiated by the user from the PC using the username johndoe@isp1.com. This PPPoE session ultimately terminates on the ISP router, using domain based tunneling on 6400. What is the correct sequence of events which occur during user authentication?
What type of signaling is most relevant to ATM networks supports SVCs?
What type of signaling is most relevant to ATM networks supports SVCs?