which device must be configured as a AAA client?
When configuring Cisco Secure ACS to support wireless EAP authentication, which device must be configured as a AAA client?
what is the percentage of RF bandwidth that can be dedicated to the phones?
By default, on the WLAN controller for a voice application using Cisco 7921 wireless IP phones, what is the percentage of RF bandwidth that can be dedicated to the phones?
Which of the following settings will reduce packet overhead and overall latency in a standalone point-to-point
Which of the following settings will reduce packet overhead and overall latency in a standalone point-to-point bridge deployment?
Which of these statements is true about SSIDs configured in Cisco ADU?
Which of these statements is true about SSIDs configured in Cisco ADU?
Which action will correct the problem?
You have just finished aligning a Cisco Aironet 1400 Series Wireless Bridge link using installation mode. When you set the link back to operational mode you loose association to the root bridge. Which action will correct the problem?
What does this indicate?
On a Cisco Aironet 802.11 a/b/g wireless LAN client adapter, the status LED and activity LED are alternating on and off. What does this indicate?
Which authentication types are allowed with the Cisco ADU when selecting WPA/WPA2/CCKM under the security opti
Which authentication types are allowed with the Cisco ADU when selecting WPA/WPA2/CCKM under the security options?
Which of the following statements explains why it is normally best to have more than one controller-based acce
Which of the following statements explains why it is normally best to have more than one controller-based access point participate in the containment of one rogue access point?
Which set of RF characteristics is directly monitored by CiscoWorks WLSE?
Which set of RF characteristics is directly monitored by CiscoWorks WLSE?
What is the lowest percentage of voice-allocated bandwidth you can select on the WLAN controller?
You have very few Cisco 7920 wireless IP phones on your network, but lots of wireless laptops. You want to increase the bandwidth available for the laptops by decreasing the bandwidth reserved for the Cisco 7920 phones. What is the lowest percentage of voice-allocated bandwidth you can select on the WLAN controller?