Based on information discovered during the investigation phase of the design, it has been decided that the proper deployment model for Ajaxis single-site call processing. The access layer devices will be placed in the IDF closets, the distribution layer devices will be placed in the MDF closets, and the core will be deployed in the computer room.

In the three office buildings, each floor has an IDF, which services approximately 70 to 80 users. Each of the R&D and Manufacturing buildings also has an IDF. Building 1 also houses the MDF in the basement. Ajax is currently using Toke Ring and an FDDI backbone. The network is to be migrated to a 100BaseT or faster Ethernet network.

Ajax has had many network outages in their current network and is concerned with network availability, especially because the phone system will now be residing on the same network. During the migration from Token Ring to Ethernet, routers will be deployed to allow access between the existing Token Ring and the new Ethernet networks. Where in the network should these routers be deployed?

Based on information discovered during the investigation phase of the design, it has been decided that the proper deployment model for Ajaxis single-site call processing. The access layer devices will be placed in the IDF closets, the distribution layer devices will be placed in the MDF closets, and the core will be deployed in the computer room.

In the three office buildings, each floor has an IDF, which services approximately 70 to 80 users. Each of the R&D and Manufacturing buildings also has an IDF. Building 1 also houses the MDF in the basement. Ajax is currently using Toke Ring and an FDDI backbone. The network is to be Aiotestking.com
migrated to a 100BaseT or faster Ethernet network.
Ajax has had many network outages in their current network and is concerned with network availability, especially because the phone system will now be residing on the same network.

In an IP telephony solution, what must be provided by an access layer switch?

Ajax Auto Components manufactures automobile parts for the service and retail markets. The Ajax corporate campus i located north of Atlanta, Georgia. Ajax is presently using an Avaya PBXforits campus phone system that uses DCS signaling. The PBX cannot support all the new features that Ajax requires, so the company has decided to change its system from traditional TDM to IP telephony. The campus currently has 942 employees in three two -story office buildings, a single Aiotestking.com
story R&D facility, and a manufacturing building. The five buildings are all connected via an FDDI ring. The campus is divided by County Line Road, which is the actual division between Fulton and Cobb counties. The office buildings are located on the east side of County Line Road, in Fulton County; the RSD building and manufacture plant are located on the west side County Line Road in Cobb County.

It will be your job to help the company migrate from the traditional PBX system to a Cisco Unified Communications Manager system on a converged voice and data network.

Due to business considerations, Ajax has chosen to do a phased implementation. While the migration is taking place, the existing PBX needs to coexist with the new Cisco Unified Communications Manager. Which three statements are to regarding a phased migration? (Choose three.)

Ajax Auto Components manufactures automobile parts for the service and retail markets. The Ajax corporate campus i located north of Atlanta, Georgia. Ajax is presently using an Avaya PBXforits campus phone system that uses DCS signaling. The PBX cannot support all the new features that Ajax requires, so the company has decided to change its system from traditional TDM to IP telephony. The campus currently has 942 employees in three two -story office buildings, a single story R&D facility, and a manufacturing building. The five buildings are all connected via an FDDI ring. The campus is divided by County Line Road, which is the actual division between Fulton and Cobb counties. The office buildings are located on the east side of County Line Road, in Fulton County; the RSD building and manufacture plant are located on the west side County Line Road in Cobb County.

It will be your job to help the company migrate from the traditional PBX system to a Cisco Unified Communications Manager system on a converged voice and data network.

Which two questions need to be answered about each network closet to insure that physical network devices can be deployed successfully? (Choose two.)

Ajax Auto Components manufactures automobile parts for the service and retail markets. The Ajax corporate campus i located north of Atlanta, Georgia. Ajax is presently using an Avaya PBXforits campus phone system that uses DCS signaling. The PBX cannot support all the new features that Ajax requires, so the company has decided to change its system from traditional TDM to IP telephony. The campus currently has 942 employees in three two -story office buildings, a single story R&D facility, and a manufacturing building. The five buildings are all connected via an FDDI ring. The campus is divided by County Line Road, which is the actual division between Fulton and Cobb counties. The office buildings are located on the east side of County Line Road, in Fulton County; the RSD building and manufacture plant are located on the west side County Line Road in Cobb County.

It will be your job to help the company migrate from the traditional PBX system to a Cisco Unified Communications Manager system on a converged voice and data network.

Which four issues are related to the physical placement of network hardware? (Choose four.)

Ajax Auto Components manufactures automobile parts for the service and retail markets. The Ajax corporate campus is located north of Atlanta, Georgia. Ajax is presently using an Avaya PBXforits campus phone system that uses DCS signaling. The PBX cannot support all the new features that Ajax requires, so the company has decided to change its system from traditional TDM to IP telephony. The campus currently has 942 employees in three two -story office buildings, a single story R&D facility, and a manufacturing building. The five buildings are all connected via an FDDI ring. The campus is divided by County Line Road, which is the actual division between Fulton and Cobb counties. The office buildings are located on the east side of County Line Road, in Fulton County; the RSD building and manufacturing plant are located on the west side County Line Road in Cobb County.

It will be your job to help the company migrate from the traditional PBX system to a Cisco Unified Communications Manager system on a converged voice and data network. Which three other pieces of information would you need to obtain from Ajax to assist you in the design of an IP telephony solution? (Choose three.)

The Ajax security policy states that all endpoint devices should minimize the chance of traffic interception. To cover this point, which three things should be done in the design of the Cisco Unified Communication solution for Ajax? (Choose three.)

Ajax has deployed a firewall between their internal network and the Internet. All traffic to the Internet will pass through the firewall. For a single-site, centralized or distributed call processing model, what needs to be done to the Unified Communications infrastructure to ensure that the Cisco Unified Communications solution is in compliance with the Ajax security policy?

Jake’s Brakes is using an H.225 gatekeeper-controlled trunk between a Cisco Unified Communications Manager cluster and a gateway. When designing the security component for the Cisco Unified Communications Manager clusters, what two things can happen if you use a firewall between a Cisco Unified Communications Manager cluster and the voice and data VU\Ns? (Choose two.)

Ajax Auto Components and Jake’s Brakes have merged. Their two Cisco Unified Communications Manager systems have been connected by a gatekeeper-controlled intercluster trunk. To dial internally they both use an access code with a two-digit site code followed by a four-digit extension. How should the dial plan be designed for calls dialed from Ajax to a DN at Jake’s?