Which of the following statements is NOT true of switch stacking?
You network team is exploring the use of switch stacking. Which of the following statements is NOT true of switch stacking? A. The master switch is the only switch with full access to the interconnect bandwidth B. Switches are connected with special cable C. The stack has a single IP address D. Up to nine […]
The command ping R2 fails when executed from R1. What command(s) would allow R1 to ping R2 by name?
R1 and R2 are connected as shown in the diagram and are configured as shown in output in the partial output of the show run command. The command ping R2 fails when executed from R1. What command(s) would allow R1 to ping R2 by name? A. R1(config)#int S1R1(config-if)#no ip address 192.168.5.5R1(config-if)# ip address 192.168.5.9 255.255.255.252 […]
What command would be used to verify trusted DHCP ports?
What command would be used to verify trusted DHCP ports? A. show mls qos B. show ip dhcp snooping C. show ip trust D. show ip arp trust Explanation: The command show ip dhcp snooping is used to verify trusted DHCP ports. This command is used to verify which ports are intended to have DHCP […]
Which Cisco 2950 switch command or set of commands would be used to create a Virtual LAN (VLAN) named MARKETIN
Which Cisco 2950 switch command or set of commands would be used to create a Virtual LAN (VLAN) named MARKETING with a VLAN number of 25? A. switch(config)# vtp domain MARKETING 25 B. switch(config)# vlan 25switch(config-vlan)# name MARKETING C. switch(config-if)# vlan 25 name MARKETING D. switch(config)# vtp 25switch(config-vtp)# name MARKETING Explanation: The following commands would […]
The commands you have executed are shown below. What is the problem with the configuration?
You are configuring a WAN connection between two offices. You cannot ping between the routers in a test. The Serial0 interface on RouterA is connected to the Serial1 interface on RouterB. The commands you have executed are shown below. What is the problem with the configuration? A. The passwords are incorrectly configured B. The usernames […]
Which Cisco IOS command should you use to accomplish the task?
You are the network administrator for your company. You have installed a new router in your network. You want to establish a remote connection from your computer to the new router so it can be configured. You are not concerned about security during the remote connection. Which Cisco IOS command should you use to accomplish […]
Which of the following should be done to enhance the accuracy of the information gathered?
Your assistant is interested in gathering statistics about connection-oriented operations. Which of the following should be done to enhance the accuracy of the information gathered? A. configure an IP SLA responder on the destination device B. configure an IP SLA responder on the source device C. schedule the operation on the destination device D. add […]
Which Cisco IOS Cisco Discovery Protocol (CDP) command displays the IP address of the directly connected Cisco
Which Cisco IOS Cisco Discovery Protocol (CDP) command displays the IP address of the directly connected Cisco devices? A. show cdp B. show cdp devices C. show cdp traffic D. show cdp neighbors detail Explanation: The show cdp neighbors detail command displays the IP address of the directly connected Cisco devices. CDP is a Layer […]
When a packet is forwarded through a network from one host to another host, which of the following fields in t
When a packet is forwarded through a network from one host to another host, which of the following fields in the Ethernet frame will change at every hop? A. Source IP address B. Destination MAC address C. Source port number D. Destination IP address Explanation: When an Ethernet frame is forwarded through the network, both […]
Users on the LAN are unable to access the Internet. How would you correct the immediate problem?
Users on the LAN are unable to access the Internet. How would you correct the immediate problem? Router# show ip interface brief Interface IP-Address OK? Method Status Protocol FastEthernet 0/0 unassigned YES unset down down FastEthernet 0/1 172.16.1.254 YES NVRAM up up Serial0/0 200.16.4.25 YES NVRAM administratively down down Serial0/1 unassigned YES unset down down […]