Which option is true when calculating round-trip delay in IP SLA operations?
Which option is true when calculating round-trip delay in IP SLA operations?
which application type should be used if you want to know round-trip delay, jitter, and packet loss for the fu
When running IP SLA, which application type should be used if you want to know round-trip delay, jitter, and packet loss for the full path?
Which three of these items could be part of your presentation?
Your company is researching a new application that runs over IPv6, but part of it must still have IPv4 support. Your company uses a traditional IPv4 network. Your plan is not to run IPv6 over the whole network, but to segment parts of the network or even to operate simultaneously with IPv6 and IPv4. You must make a brief presentation about IPv6 technology to the board of technical directors. Which three of these items could be part of your presentation? (Choose three.)
Which two of these factors describe the impact of activating EIGRP over each separate part?
Half of your network uses RIPv2 and the other half runs OSPF. The networks do not communicate with each other. Which two of these factors describe the impact of activating EIGRP over each separate part? (Choose two.)
What happens when you apply this ACL on the MPLS-EBGP connection to BHK?
A request arrived on your MPLS-vpn-bgp group. Due to a security breach, your customer is experiencing DoS attacks coming from specific subnets (200.0.10.0/24, 200.0.12.0/24). You have checked all MPLS-EBGP routes being advertised to BHK from other VPN sites and found four subnets listed:
200.0.10.0/24, 200.0.11.0/24, 200.0.12.0/24, 200.0.13.0/24. You immediately apply an
outbound ACL filter using the appropriate MPLS-EBGP tool: access-list 1 deny 0.0.0.0 255.255.254.255 access-list 1 permit any What happens when you apply this ACL on the MPLS-EBGP connection to BHK?
Which command must be enabled for correct operation?
If a certificate authority trustpoint is not configured when enabling HTTPS and the remote HTTPS server requires client authentication, connections to the secure HTTP client will fail. Which command must be enabled for correct operation?
which two FTP modes are supported?
When using IP SLA FTP operation, which two FTP modes are supported? (Choose two.)
which one of these actions should you take?
You replaced your Layer 3 switch, which is the default gateway of the end users. Many users cannot access anything now, including email, Internet, and other applications, although other users do not have any issues. All of the applications are hosted in an outsourced data center. In order to fix the problem, which one of these actions should you take?
Which three actions would you take to improve OSPF convergence time?
The core of a network has four routers connected in a square design with Gigabit Ethernet links using /30 subnets. The network is used to carry voice traffic and other applications. Convergence time is taking more than expected. Which three actions would you take to improve OSPF convergence time? (Choose three.)
What are three possible causes of this problem?
The network administrator is trying to add Switch1 to the network, but the 802.1Q trunk is not coming up. Switch1 was previously tested in the laboratory and its trunk configuration worked fine. What are three possible causes of this problem? (Choose three.)