What benefit does AToM provide to the service provider’s customers?

What are two purposes of the BGP scan-time command? (Choose two.)

If there is no exact match in the local routing table, what three conditions would result in BGP introducing the classful network 172.0.0.0 with the mask 255.0.0.0 into the BGP table? (Choose three.)

Which three fields must be included in MPBGP updates between PE routers in an MPLS network? (Choose three.)

What state will a BGP session move to immediately after the router sends a BGP Open message to its neighbor?

Which one of these statements regarding intraconfederation EBGP sessions is correct?

What does the BGP synchronization rule prevent?

The core routers within a transit AS are running both IBGP and IGP. The edge routers within the transit AS are using the next-hop-self option to establish the IBGP sessions. What can be implemented to improve the routing performance to all external prefixes?

The MPLS VPN provider is using a separate Internet VPN to provide Internet access to its MPLS VPN customers. Currently, all of its customers are not able to access the Internet. The partial provider’s CE-Internet router configuration is shown below. Based on the configuration, what could be the cause of the problem?

ip route 0.0.0.0 0.0.0.0 10.1.1.1

!

router bgp 51001
network 0.0.0.0
neighbor 10.2.2.2 remote-as 51002 ! PE neighbor router
neighbor 10.2.2.2 prefix-list test1 out
neighbor 10.3.3.3 remote-as 51001 ! Another Internet router
neighbor 10.3.3.3 prefix-list test2 out
!
ip prefix-list test2 permit 0.0.0.0/0
ip prefix-list test1 permit 0.0.0.0/0 ge 1

BGP is used as the CE-PE routing protocol in an MPLS VPN. The customer routes are successfully propagated from the CE router to the ingress PE router, but they are not showing up on the egress PE router. What is the most likely cause of the problem?