A local storage installation of ESX on a Cisco UCS C-Series server has failed due to local storage issues.
What is the cause of the problem?

A customer is trying to boot an operating system installed on a Cisco UCS B-Series blade server after a RAID1
cluster migration. The RAID LUN remains in inactivestate during and after the service profile association and
the server does not boot. What is the cause of thisproblem?

A customer would like to create an Ethernet trafficmonitoring session on a Cisco UCS server to troubleshoot
network connectivity. The customer has entered the following commands via CLI:
UCS-A# scope eth-traffic-mon
UCS-A /eth-traffic-mon # scope fabric a
UCS-A /eth-traffic-mon/fabric # create eth-mon-session EthMonitor33
UCS-A /eth-traffic-mon/fabric/eth-mon-session* # create dest-interface 2 12
UCS-A /eth-traffic-mon/fabric/eth-mon-session/dest-interface* # set speed 20gbps
UCS-A /eth-traffic-mon/fabric/eth-mon-session/dest-interface* # commit-buffer
UCS-A /eth-traffic-mon/fabric/eth-mon-session/dest-interface #
Which outcome will this command sequence produce?

A customer is configuring VSANs in a Cisco UCS domain. After configuring the VSANs 3840, 3841, and 3842
in FC end-host mode, the customer sees that these VSANs are not operational and that Cisco UCS Manageris
raising faults. What is the cause of this problem?

What is the correct sequence to export tech supportdata from the Cisco IMC GUI interface?

You are attempting to install Microsoft Server 2008R2 on a Fibre Channel LUN, but the installer does not see
the LUN. You have used F6 to load the appropriate SCSI driver. What should your first troubleshooting step
be?

A customer calls in a trouble ticket and explains that after a power failure, the UPS was discovered to be
defective and the Cisco UCS C210 M2 server running Windows 2008 R2 went down without proper shutdown.
After restarting the server, you discover the RAID 5 array rebuilding parity. Which write-cache settings on the
LSI MegaRAID 9260-4i controller explain this symptom?

How long are the LED states saved after a blade is removed from a Cisco UCS chassis?

How does the FSM react after an error or timeout ata stage?

On a Cisco UCS B-Series data center environment; how many default roles are there when utilizing RBAC for
security restriction?