which two types of areas?
Area Border Router (ABR) is a router located on the border of one or more OSPF areas that
connect those areas to the backbone network. An ABR will inject a default route into which two
types of areas? (Choose two.)
What is the gain tilt of all of the seven channels?
Click the Exhibit button to view the graph.
The graph represents optical signal power versus wavelength measurement from 1550nm to
1560nm. What is the gain tilt of all of the seven channels?
How many E-1s can be aggregated (maximum) and mapped into a VC-12 Signal?
How many E-1s can be aggregated (maximum) and mapped into a VC-12 Signal?
Which routing protocol and administrative distance can be used by RG to reach subnet 10.1.1.0/24?
Study the exhibit carefully. In this network, if all required configurations are true for routing. Subnet
10.1.1.0/24 is sourced by RA and advertised via BGP, OSPF, and EIGRP. Finally, RG knows this
subnet. Which routing protocol and administrative distance can be used by RG to reach subnet
10.1.1.0/24?
Which K value setting will be used to make sure that this link is not used by EIGRP when the link load reaches
You are a network technician, study the exhibit carefully. In this EIGRP network, the output of the
command show interface for the link between R2 and R5 indicates that the link load varies
between 10 and 35. Which K value setting will be used to make sure that this link is not used by
EIGRP when the link load reaches 35, but can be used again when the link load drops below 20?
what mechanism needs to be employed on the remote site routers to aid congestion avoidance in the core, based
Click the Exhibit button to view the configuration.
In the diagram shown, what mechanism needs to be employed on the remote site routers to aid
congestion avoidance in the core, based on traffic priorities?
what will be the purpose of this route map when applied to traffic passing through a router?
According to the exhibit provided, what will be the purpose of this route map when applied to traffic
passing through a router?
What access list for Router B would accomplish this?
Click the Exhibit button to view the configuration.
The network associated with Router A’s Ethernet 0 port is designed to be publicly accessible.
However, Router B’s Token Ring 0 network should be accessible only to hosts from Router A’s
Ethernet 0 network. What access list for Router B would accomplish this?
Which reserved 2-byte AS number is seen in the AS path when a BGP router is not capable of understanding 4-byt
Which reserved 2-byte AS number is seen in the AS path when a BGP router is not capable of
understanding 4-byte AS numbers?
If the destination address of the frame is not present in the database, the bridge
An incoming frame is received by a transparent bridge. If the destination address of the frame is
not present in the database, the bridge