What is the cause of the problem?
During the installation of Windows 2008 64-bit operating system on a Cisco UCS server, the RAID
controller is not found. What is the cause of the problem?
What is the cause of the problem?
A local storage installation of ESX on a Cisco UCS C-Series server has failed due to local storage
issues. What is the cause of the problem?
What is the cause of this problem?
A customer is trying to boot an operating system installed on a Cisco UCS B-Series blade server
after a RAID1 cluster migration. The RAID LUN remains in inactive state during and after the
service profile association and the server does not boot. What is the cause of this problem?
which patterns would be shown in the Cisco Unified Communications Manager RTMT tool?
Refer to the exhibits.
When a remote Cisco Unified Communications Manager learns the advertised patterns that are
shown in the exhibit, which patterns would be shown in the Cisco Unified Communications
Manager RTMT tool?
Which outcome will this command sequence produce?
A customer would like to create an Ethernet traffic monitoring session on a Cisco UCS server to
troubleshoot network connectivity. The customer has entered the following commands via CLI:
UCS-A# scope eth-traffic-mon
UCS-A /eth-traffic-mon # scope fabric a
UCS-A /eth-traffic-mon/fabric # create eth-mon-session EthMonitor33
UCS-A /eth-traffic-mon/fabric/eth-mon-session* # create dest-interface 2 12
UCS-A /eth-traffic-mon/fabric/eth-mon-session/dest-interface* # set speed 20gbps
UCS-A /eth-traffic-mon/fabric/eth-mon-session/dest-interface* # commit-buffer
UCS-A /eth-traffic-mon/fabric/eth-mon-session/dest-interface #
Which outcome will this command sequence produce?
What is the cause of this problem?
A customer is configuring VSANs in a Cisco UCS domain. After configuring the VSANs 3840,
3841, and 3842 in FC end-host mode, the customer sees that these VSANs are not operational
and that Cisco UCS Manager is raising faults. What is the cause of this problem?
Which type of voice port supports immediate-start, wink-start, and delay-start followed by pulse or DTMF tones
Which type of voice port supports immediate-start, wink-start, and delay-start followed by pulse or
DTMF tones?
What is the correct sequence to export tech support data from the Cisco IMC GUI interface?
What is the correct sequence to export tech support data from the Cisco IMC GUI interface?
Which situation can cause this issued?
Refer to the exhibits.
When the IP phone 2001 places a call to 9011 49403021 56001, the call is sent to the Cisco
Unified Border Element as 40302156001 which is what the ITSP expects to receive. The ITSP
support personnel claim that they never saw the call. Issuing the debug CCSIP message
command on the Cisco Unified Border Element results in the message “SIP/2 0 404 Not Found”.
Refer to the Cisco Unified Border Element configuration, debug voice dial and ccsip messages
exhibits. Which situation can cause this issued?
What should your first troubleshooting step be?
You are attempting to install Microsoft Server 2008 R2 on a Fibre Channel LUN, but the installer
does not see the LUN. You have used F6 to load the appropriate SCSI driver. What should your
first troubleshooting step be?