What is the issue?
A customer is configuring an upstream disjoint Layer 2 network in a Cisco UCS domain. So far
they have configured the following:
Fabric Interconnects are in switching mode.
There is symmetrical configuration for high availability.
There are no overlapping VLANs.
Each vNIC is communicating with one disjoint Layer 2 network.
After validating the above, the customer is still having issues with network connectivity. What is
the issue?
Which of the following methods can be used in order to reach the individual extensions at Site B when called v
Refer to the exhibit. An administrator is migrating a PBX telephony system to an IP Phone solution
using a fixed numbering plan. The extension numbers and PSTN DIDs cannot be changed. Which
of the following methods can be used in order to reach the individual extensions at Site B when
called via the PSTN?
which three of these?
A customer is configuring a network control policy in a Cisco UCS domain. The network control
policy configures the network control settings for the Cisco UCS domain, including which three of
these? (Choose three.)
Which of the following can cause this issue?
Refer to the exhibits.
MOH has been configured to run from flash at the BR1 site. The HQ phones and MOH server are
placed in the Default region through the Default device pool. The BR1 phones are placed in the
BR1 region through the BR1 device pool. The region configuration between Default and BR1 only
permits G.729 codec.
When an IP phone user at the HQ site places a BR1 caller on hold, the BR1 caller hears tone on
hold. Which of the following can cause this issue?
What is the cause of this issue?
A customer is troubleshooting QoS in a Cisco UCS domain due to high packet drops in the
network. The customer has configured the vNIC and associated QoS policy, and changed the
MTU from 1000 to 1200. Packet drops still exist. What is the cause of this issue?
Why is the dynamic vNIC policy required?
A customer is configuring the dynamic vNIC connection policy in a Cisco UCS domain. Why is the
dynamic vNIC policy required?
What is the default number of dynamic vNICs that is specified by the Cisco UCS Manager when creating a dynamic
What is the default number of dynamic vNICs that is specified by the Cisco UCS Manager when
creating a dynamic vNIC connection policy?
which tab would you select to identify the fabric interconnect uplink associated with a given virtual circuit?
Looking at the Equipment > Chassis > Servers > Server X view from the Cisco UCS Manager
GUI, which tab would you select to identify the fabric interconnect uplink associated with a given
virtual circuit?
What is the most likely cause for this issue?
An IP phone that is connected through a Cisco Catalyst 3750 Series Switch is failing to register
with the subscriber as a backup server. When the user presses the settings button on the phone,
only the Cisco Unified Communications Manager publisher shows as registered. What is the most
likely cause for this issue?
Which of the following best describes the implementation challenges that are associated with variable-length n
Which of the following best describes the implementation challenges that are associated with
variable-length numbering plans?