The command frame-relay map ip 10.121.16.8 102 broadcast was entered on the router. Which of
the following statements is true concerning this command?

In the Frame Relay network, which IP addresses would be assigned to the interfaces with point-topoint PVCs?

It has become necessary to configure an existing serial interface to accept a second Frame Relay
virtual circuit. Which of the following are required to solve this? (Choose three)

A network administrator is troubleshooting an EIGRP problem on a router and needs to confirm the
IP addresses of the devices with which the router has established adjacency. The retransmit interval
and the queue counts for the adjacent routers also need to be checked. What command will display
the required information?

Refer to the exhibit.

The company uses EIGRP as the routing protocol. What path will packets take from a host on
192.168.10.192/26 network to a host on the LAN attached to router R1?
R3# show ip route Gateway of last resort is not set 192 168.20.0/24 is variably subnetted, 6 subnets,
2 masks D 192.168.20.64/26 [90/2195456] via 192.168.20.9, 00:03:31, Serial0/0 D 192.168.20.0/30
[90/2681856] via 192.168.20.9, 00:03:31, Serial0/0 C 192.168.20.4/30 is directly connected,

Serial0/1 C 192.168.20.8/30 is directly connected, Serial0/0 C 192.168.20.192/26 is directly
connected, FastEthernet0/0 D 192.168.20.128/26 [90/2195456] via 192.168.20.5,00:03:31, Serial0/1

A router receives information about network 192.168.10.0/24 from multiple sources. What will the
router consider the most reliable information about the path to that network?

Refer to the exhibit.

Host A pings interface S0/0 on router 3, what is the TTL value for that ping?

Which feature does PPP use to encapsulate multiple protocols?

What is the purpose of LCP?

Refer to the exhibit.

A packet with a source IP address of 192.168.2.4 and a destination IP address of 10.1.1.4 arrives at
the AcmeB router. What action does the router take?