Central Florida Widgets recently installed a new router in their office. Complete the network
installation by performing the initial router configurations and configuring R1PV2 routing using the
router command line interface (CLI) on the RC.
Configure the router per the following requirements:
Name of the router is R2
Enable. secret password is cisco
The password to access user EXEC mode using the console is cisco2
The password to allow telnet access to the router is cisco3
IPV4 addresses mast be configured as follows:
Ethernet network 209.165.201.0/27 – router has fourth assignable host address in subnet
Serial network is 192.0.2.176/28 – router has last assignable host address in the subnet.
Interfaces should be enabled.
Router protocol is RIPV2
Attention:
In practical examinations, please note the following, the actual information will prevail.
1. Name or the router is xxx
2. EnablE. secret password is xxx
3. Password In access user EXEC mode using the console is xxx

4. The password to allow telnet access to the router is xxx
5. IP information

What are three reasons to collect Netflow data on a company network? (Choose three.)

The task is to create and apply an access-list with no more than three statements that will allow ONLY host C web access to the Finance Web Server.

The task is to create and apply an access-list with no more than three statements that will allow ONLY host C web access to the Finance Web Server.

LAB – SIMULATION
The task is to create and apply an access-list with no more than three statements that will allow ONLY host C web access to the Finance Web Server.

What Netflow component can be applied to an interface to track IPv4 traffic?

What Cisco IOS feature can be enabled to pinpoint an application that is causing slow network
performance?

What command visualizes the general NetFlow data on the command line?

What are three values that must be the same within a sequence of packets for Netflow to consider
them a network flow? (Choose three.)

What are three factors a network administrator must consider before implementing Netflow in the
network? (Choose three.)