What is the effect of setting Client Exclusion to Enabled and set to a Timeout Value of 0 seconds in a Cisco W
Refer to the exhibit.
What is the effect of setting Client Exclusion to Enabled and set to a Timeout Value of 0 seconds in a Cisco WLC v7.0?
Which one of the following best describes the implementation of VLAN pooling on a Cisco WLC v7.0?
Which one of the following best describes the implementation of VLAN pooling on a Cisco WLC v7.0?
Place the correct protocols in their locations on the diagram.
DRAG DROP
Place the correct protocols in their locations on the diagram.
Place the correct next-hops in their locations in the diagram.
DRAG DROP
By default, NOT using the next-hop-self option, what is the next-hop for the 172.0.0.0/8 BGP updates shown in the diagram?
Place the correct next-hops in their locations in the diagram.
you need to perform a WLAN site survey on? (Choose two)
4
What are two reasons that it is always preferable to obtain a digital copy of the “as built” drawings for a site you need to perform a WLAN site survey on? (Choose two.)
It is only necessary to complete the BGP configuration steps outlined below.
SIMULATION
Network topology exhibit
Domain .com recently issued a contract to ISP (AS 65020) to provide a second Internet connection their Boston location. A new router, Domain 3, will need to be configured to connect to the Internet Service Providers. It is necessary to configure this router to exchange routes with both ISPs, and to filter the routing advertisements out to the ISPs. The basic configuration for the new router has been entered. It is only necessary to complete the BGP configuration steps outlined below.
On the Domain 3 router:
Configure BGP to exchange routes with ISP-A (AS 65010). Configure BGP to exchange routes with ISP-B (AS 65020). Only announce the two local Ethernet LAN prefixes (172.16.1.0/24 and 172.16.2.0/24) to the ISPs.
Configure the appropriate as-path access-list to permit only locally originated routes to be advertised in outbound routing updates to the ISPs. Use as-patch ACL number 10 containing only one statement. Start the simulation by clicking on the local host icon.
Which infrastructure issue needs to be verified and potentially resolved before deploying a centralized 802.11
Which infrastructure issue needs to be verified and potentially resolved before deploying a centralized 802.11n WLAN?
Complete the following BGP configuration on CK5
Exhibit
Complete the following BGP configuration on CK5 so that it will remove the 65001 private AS number before it sends the 13.5.0.0/16 update to AS 200.
Hostname CK5
!
!Output omitted
!
router bgp 300
neighbor 3.3.3.3 remote-as 300
neighbor 4.4.4.4 remote-as 300
neighbor 6.6.6.6 remote-as 300
———————————————
Place the methods in their correct locations in the diagram?
DRAG DROP
Identify the most appropriate method to connect the customers to the ISPs, to interconnect the two ISPs, and to interconnect the router within each ISP. Place the methods in their correct locations in the diagram?
What is the correct BGP configuration on CK1 and CK2
Exhibit
What is the correct BGP configuration on CK1 and CK2 to have AS 65102 prefer the path to CK1 over the path to CK2 to reach AS 65001? (Influence the path selection decision by using the MED attribute)