Drag the OSPF technology on the left to the approriate network convergence step on the right that this technno
DRAG DROP
Drag the OSPF technology on the left to the approriate network convergence step on the right that this technnology helps to mitigate?
which of the following 1000V characteristics can the designer take advantage of?
Refer to the exhibit.
The Cisco Nexus 1000V in the VMware vSphere solution effectively creates an additional access layer in the virtualized data center network; which of the following 1000V characteristics can the designer take advantage of?
which of the following requirements would help the designer
When designing the Network Admission Control (NAC) Appliance for the Enterprise Campus Network, which of the following requirements would help the designer to narrow down the NAC choices, from Virtual Gateway to Real IP Gateway, or from In-band to out-of-band?
What will happen to traffic within VLAN 14 with a source address of 172.16.10.5?
Refer to the exhibit. What will happen to traffic within VLAN 14 with a source address of 172.16.10.5?
LAB
LAB
LAB
LAB
The information of the question
VTP Domain name : cisco
VLAN Ids 20 31
IP Addresses 172.16.71.1/24 172.16.132.1/24
These are your specific tasks:
1. Configure the VTP information with the distribution layer switch as the VTP server
2. Configure the VTP information with the access layer switch as a VTP client
3. Configure VLANs on the distribution layer switch
4. Configure inter-VLAN routing on the distribution layer switch
5. Specific VLAN port assignments will be made as users are added to the access layer switches in the
future.
6. All VLANs and VTP configurations are to completed in the global configuration To configure the
switch click on the host icon that is connected to the switch be way of a serial console cable.
Which command sequence is required to configure the IP address of the rendezvous point (RP)
Which command sequence is required to configure the IP address of the rendezvous point (RP) located at IP address 10.10.10.1?
LAB
LAB
The information of the question
You will configure FastEthernet ports 0/12 through 0/24 for users who belong to VLAN 20. Also, all VLAN and VTP configurations are to be completed in global configuration mode as VLAN database mode is being deprecated by Cisco. You are required to accomplish the following tasks:
1. Ensure the switch does not participate in VTP but forwards VTP advertisements received on trunk
ports.
2. Ensure all non-trunking interfaces (Fa0/1 to Fa0/24) transition immediately to the forwarding state of
Spanning-Tree.
3. Ensure all FastEthernet interfaces are in a permanent non-trunking mode.
4. Place FastEthernet interfaces 0/12 through 0/24 in VLAN 20
LAB
LAB
LAB
LAB
The information of the question
VTP Domain name : cisco
VLAN Ids 20 31
IP Addresses 172.16.71.1/24 172.16.132.1/24
These are your specific tasks:
1. Configure the VTP information with the distribution layer switch as the VTP server
2. Configure the VTP information with the access layer switch as a VTP client
3. Configure VLANs on the distribution layer switch
4. Configure inter-VLAN routing on the distribution layer switch
5. Specific VLAN port assignments will be made as users are added to the access layer switches in the
future.
6. All VLANs and VTP configurations are to completed in the global configuration To configure the
switch click on the host icon that is connected to the switch be way of a serial console cable.