What effect will this configuration command have?
In Frame Relay, the BECN bit is set by:
In Frame Relay, the BECN bit is set by:
The address field contains:
what devices resend packets that do not transmit correctly?
In Frame Relay, what devices resend packets that do not transmit correctly?
What is true about the DLCI field in the Frame Relay header?
What is true about the DLCI field in the Frame Relay header?
What was the symptom observed by the subscriber?
A subscriber’s DSL service was not working correctly. The subscriber discovered that a DSL microfilter was accidentally installed between the DSL modem and telephone line instead of between the telephone and telephone line. What was the symptom observed by the subscriber?
which one of the routers would forward a packet destined for 10.1.1.1?
Exhibit:
10.1.1.0/24 through OSPF
10.1.0.0/16 through EIGRP
10.1.0.0&16 static
If a router had the three routers listed, which one of the routers would forward a packet destined for 10.1.1.1?
The ATU-C refers to the:
The ATU-C refers to the:
which of the following should provide improved error correction?
A DSL line status report shows a high number of corrected and uncorrected errors. The line is configured at 4 milliseconds interleave delay and 4 FEC check-bytes. To reduce the number of uncorrected errors without a detailed analysis of whether the errors are continuous or “bursty”, which of the following should provide improved error correction?
What will allow the best overall DSL performance?
The following are wire sizes used in telephone company cables. What will allow the best overall DSL performance?