According to the diagram, what attribute is initiated by AS200 (IBGP) to give preference to the path A or D traffic will take when going from AS200 to AS100? What attribute is initiated by AS200 (EBGP) to give preference to the path B or C traffic will take when going from AS100 to AS200?

Which are the correct ways to release IBGP from the condition that all IBGP neighbors need to be fully meshed? (multiple answer)

BGP can implement a policy of ‘Route Dampening’ to control route instability. What statement about route dampening is NOT correct?

In BGP, why should a Route Reflector be used?

When a subscriber is configured for PPPoE service, the DSL modem is usually configured as:

Inferface FastEthernet 0/0/0ip address 192.168.1.1 255.255.255.0!interface ATM 0/0/0.30 multipointpvc 1/43encapsulation aal5ciscoppp Virtual-Template 2!!interface Virtual-Template 2ip unnumbered FastEthernet 0/0/0no peer default ip addressppp authentication pap chapppp ipcp mask 255.255.255.224!Refer to the configuration above. A customer connected to PVC 1/43 boots their CPE (PPPoA encapsulation). The Radius server is properly configured and recognizes the customer. The Radius server assigns the Framed-IP-netmask 192.168.10.1/29. What information does the CPE receive from the NRP via PPP IPCP negotiation?

What is the purpose of the following command? virtual-template {template-number}pre-clone {number}

What does the Service Selection Gateway (SSG) feature on the NRP support to authenticate and authorize users?