Which statement about disabled signatures when using Cisco IOS IPS is true?

Which type of NAT would you configure if a host on the external network required access to an
internal host?

Which option is a characteristic of a stateful firewall?

When STP mitigation features are configured, where should the root guard feature be deployed?

Which Layer 2 protocol provides loop resolution by managing the physical paths to given network segments?

Which statement best represents the characteristics of a VLAN?

Which step is important to take when implementing secure network management?

Which priority is most important when you plan out access control lists?

Which type of Cisco IOS access control list is identified by 100 to 199 and 2000 to 2699?

Refer to the below.

14:00:09: TAC+: Opening TCP/IP connection to 192.168.60.15 using source 10.116.0.79

14:00:09: TAC+: Sending TCP/IP packet number 383258052-1 to 192.168.60.15 (AUTHEN/START)

14:00:09: TAC+: Receiving TCP/IP packet number 383258052-2 from 192.168.60.15

14:00:09: TAC+ (383258052): received authen response status = GETUSER

14:00:10: TAC+: send AUTHEN/CONT packet

14:00:10: TAC+: Sending TCP/IP packet number 383258052-3 to 192.168.60.15 (AUTHEN/CONT)

14:00:10: TAC+: Receiving TCP/IP packet number 383258052-4 from 192.168.60.15

14:00:10: TAC+ (383258052): received authen response status = GETPASS

14:00:14: TAC+: send AUTHEN/CONT packet

14:00:14: TAC+: Sending TCP/IP packet number 383258052-5 to 192.168.60.15 (AUTHEN/CONT)

14:00:14: TAC+: Receiving TCP/IP packet number 383258052-6 from 192.168.60.15

14:00:14: TAC+ (383258052): received authen response status = PASS

14:00:14: TAC+: Closing TCP/IP connection to 192.168.60.15

Which statement about this debug output is true?