Where in the network should these routers be deployed?
Based on information discovered during the investigation phase of the design, it has been decided that the proper deployment model for Ajaxis single-site call processing. The access layer devices will be placed in the IDF closets, the distribution layer devices will be placed in the MDF closets, and the core will be deployed in the computer room.
In the three office buildings, each floor has an IDF, which services approximately 70 to 80 users. Each of the R&D and Manufacturing buildings also has an IDF. Building 1 also houses the MDF in the basement. Ajax is currently using Toke Ring and an FDDI backbone. The network is to be migrated to a 100BaseT or faster Ethernet network.
Ajax has had many network outages in their current network and is concerned with network availability, especially because the phone system will now be residing on the same network. During the migration from Token Ring to Ethernet, routers will be deployed to allow access between the existing Token Ring and the new Ethernet networks. Where in the network should these routers be deployed?
What is needed to successfully complete this link?
A customer in Europe needs to establish an 11-Mbps wireless bridge link between two office buildings that are approximately 1.3 km apart. The wireless link will pass through a public park, which contains a lake that is surrounded by trees. You run the range calculation and determine that the Cisco Aironet 1300 Series Outdoor Access Point/Bridge should work. You install the link using 10.5-dB yagis with 75 feet of standard Cisco cabling and both radios set at 20 mW. The wireless bridges are not able to establish or maintain a link.
What is needed to successfully complete this link?
Which Cisco Catalyst Express 520 feature optimizes quality of service?
Which Cisco Catalyst Express 520 feature optimizes quality of service?
what must be provided by an access layer switch?
Based on information discovered during the investigation phase of the design, it has been decided that the proper deployment model for Ajaxis single-site call processing. The access layer devices will be placed in the IDF closets, the distribution layer devices will be placed in the MDF closets, and the core will be deployed in the computer room.
In the three office buildings, each floor has an IDF, which services approximately 70 to 80 users. Each of the R&D and Manufacturing buildings also has an IDF. Building 1 also houses the MDF in the basement. Ajax is currently using Toke Ring and an FDDI backbone. The network is to be Aiotestking.com
migrated to a 100BaseT or faster Ethernet network.
Ajax has had many network outages in their current network and is concerned with network availability, especially because the phone system will now be residing on the same network.
In an IP telephony solution, what must be provided by an access layer switch?
Which two statements best describe the wireless core feature set using autonomous access points when implement
Which two statements best describe the wireless core feature set using autonomous access points when implementing Wireless Domain Services? (Choose two.)
Which three statements are to regarding a phased migration?
Ajax Auto Components manufactures automobile parts for the service and retail markets. The Ajax corporate campus i located north of Atlanta, Georgia. Ajax is presently using an Avaya PBXforits campus phone system that uses DCS signaling. The PBX cannot support all the new features that Ajax requires, so the company has decided to change its system from traditional TDM to IP telephony. The campus currently has 942 employees in three two -story office buildings, a single Aiotestking.com
story R&D facility, and a manufacturing building. The five buildings are all connected via an FDDI ring. The campus is divided by County Line Road, which is the actual division between Fulton and Cobb counties. The office buildings are located on the east side of County Line Road, in Fulton County; the RSD building and manufacture plant are located on the west side County Line Road in Cobb County.
It will be your job to help the company migrate from the traditional PBX system to a Cisco Unified Communications Manager system on a converged voice and data network.
Due to business considerations, Ajax has chosen to do a phased implementation. While the migration is taking place, the existing PBX needs to coexist with the new Cisco Unified Communications Manager. Which three statements are to regarding a phased migration? (Choose three.)
Which two are benefits of installing Cisco Monitor Director at an SMB site for the partner selling the solutio
Which two are benefits of installing Cisco Monitor Director at an SMB site for the partner selling the solution? (Choose two.)
Which two questions need to be answered about each network closet to insure that physical network devices can
Ajax Auto Components manufactures automobile parts for the service and retail markets. The Ajax corporate campus i located north of Atlanta, Georgia. Ajax is presently using an Avaya PBXforits campus phone system that uses DCS signaling. The PBX cannot support all the new features that Ajax requires, so the company has decided to change its system from traditional TDM to IP telephony. The campus currently has 942 employees in three two -story office buildings, a single story R&D facility, and a manufacturing building. The five buildings are all connected via an FDDI ring. The campus is divided by County Line Road, which is the actual division between Fulton and Cobb counties. The office buildings are located on the east side of County Line Road, in Fulton County; the RSD building and manufacture plant are located on the west side County Line Road in Cobb County.
It will be your job to help the company migrate from the traditional PBX system to a Cisco Unified Communications Manager system on a converged voice and data network.
Which two questions need to be answered about each network closet to insure that physical network devices can be deployed successfully? (Choose two.)
Which component of WPAv2 would limit the rollout because of the continued use of old access points?
The customer wants to implement wireless security through implementation of WPAv2. Which component of WPAv2 would limit the rollout because of the continued use of old access points?
which statement about address translation is correct?
Refer to the exhibit. According to the Cisco Adaptive Security Device Manager window, which statement about address translation is correct?
