Which description is correct according to the output of the command show spanning-tree?
exhibit Which description is correct according to the output of the command show spanning-tree?
What would happen if another device is connected to the port after the maximum number of devices…
You are a network technician at PassGuide.com. Please study the exhibit carefully. Port security has been configured on the switch port Fa0/5. What would happen if another device is connected to the port after the maximum number of devices has been reached, even if one or more of the original MAC addresses are inactive?
what two conclusions can be deduced?
If you are a network technician, study the exhibit carefully. Based on the running configuration that is shown for interface FastEthernet0/2, what two conclusions can be deduced?
(Choose two.)
which two descriptions are true about the routes to be redistributed into OSPF?
exhibit According to the following exhibit, which two descriptions are true about the routes to be redistributed into OSPF? (Choose two.)
When a switch receives a UDLD message on a link, what must it do?
When a switch receives a UDLD message on a link, what must it do?
What does the command channel-group 1 mode desirable do?
As a network technician, study the exhibit carefully. exhibit What does the command channel-group 1 mode desirable do?
Which two items are the effects of the IP multicast global configuration command
Which two items are the effects of the IP multicast global configuration command ip pim send-rp-announce loopback0 scope 31 group-list 5 issued on multicast router RTA? (Choose two.)
What will occur when a non edge switch port that is configured for Rapid Spanning Tree…
What will occur when a non edge switch port that is configured for Rapid Spanning Tree does not receive a BPDU from its neighbor for three consecutive hello time intervals?
What need to be done to make the group function properly?
exhibit LAB 8?
– DS1( Distribute switch 1) is the primary device for Vlan 101, 102, 105
– DS2 ( Distribute switch 2) is the primary device for Vlan 103 and 104
VLAN Trunk Protocol (VTP) reduces administration in a switched network…
exhibit LAB 7?
VLAN Trunk Protocol (VTP) reduces administration in a switched network. When you configure a new VLAN on one VTP server, the VLAN is distributed through all switches in the domain. This reduces the need to configure the same VLAN everywhere. VTP is a Cisco-proprietary protocol that is available on most of the Cisco Catalyst series products.
There is a Lab(about VTP) in the cisco CCNP BCMSN 642-812 exam.
Requirements:
These are your specific tasks:
1. Configure the VTP information with the distribution layer switch as the VTP server
2. Configure the VTP information with the access layer switch as a VTP client
3. Configure VLANs on the distribution layer switch
4. Configure inter-VLAN routing on the distribution layer switch
5. Specific VLAN port assignments will be made as users are added to the access layer switches in the future.
6. All VLANs and VTP configurations are to completed in the global configuration To configure the switch click on the host icon that is connected to the switch be way of a serial console cable.