The customer wishes to install a cluster. In his network, there is a switch which is incapable of
forwarding multicast. Is it possible to install a cluster in this situation?

What could be a reason why synchronization between primary and secondary Security
Management Servers does not occur?

What is the proper command for importing users into the R77 User Database?

In a R75 Management High Availability (HA) configuration, you can configure synchronization to
occur automatically, when:
1. The Security Policy is installed.
2. The Security Policy is saved.
3. The Security Administrator logs in to the seconday Security Management Server and changes
its status to Active.
4. A scheduled event occurs.
5. The user data base is installed.
Select the BEST response for the synchronization trigger.

What is a requirement for setting up R77 Management High Availability?

You are establishing a ClusterXL environment, with the following topology:
VIP internal cluster IP = 172.16.10.3; VIP external cluster IP = 192.168.10.3
Cluster Member 1: 4 NICs, 3 enableD. hme0: 192.168.10.1/24, hme1: 10.10.10.1/24, qfe2:
172.16.10.1/24
Cluster Member 2: 5 NICs, 3 enabled; hme3: 192.168.10.2/24, hme1: 10.10.10.2/24, hme2:
172.16.10.2/24
External interfaces 192.168.10.1 and 192.168.10.2 connect to a VLAN switch. The upstream
router connects to the same VLAN switch. Internal interfaces 172.16.10.1 and 172.16.10.2
connect to a hub. 10.10.10.0 is the synchronization network. The Security Management Server is
located on the internal network with IP 172.16.10.3. What is the problem with this configuration?

You are preparing computers for a new ClusterXL deployment. For your cluster, you plan to use
three machines with the following configurations:
Cluster Member 1: OS – GAiA; NICs – QuadCard; Memory – 1 GB; Security Gateway – version:
R71 and primary Security Management Server installed, version: R77
Cluster Member 2: OS – GAiA; NICs – 4 Intel 3Com; Memory – 1 GB; Security Gateway only,
version: R77
Cluster Member 3: OS – GAiA; NICs – 4 other manufacturers; Memory – 512 MB; Security Gateway
only, version: R77
Are these machines correctly configured for a ClusterXL deployment?

You are preparing computers for a new ClusterXL deployment. For your cluster, you plan to use
four machines with the following configurations:
Cluster Member 1: OS – GAiA; NICs – QuadCard; Memory – 1 GB; Security Gateway only, version:
R77
Cluster Member 2: OS – GAiA; NICs – 4 Intel 3Com; Memory – 1 GB; Security Gateway only,
version: R77

Cluster Member 3: OS – GAiA; NICs – 4 other manufacturers; Memory: 512 MB; Security Gateway
only, version: R77
Security Management Server: MS Windows 2008; NIC – Intel NIC (1); Security Gateway and
primary Security Management Server installed, version: R77
Are these machines correctly configured for a ClusterXL deployment?

What is the reason for the following error?
Exhibit:

In which ClusterXL Load Sharing mode, does the pivot machine get chosen automatically by
ClusterXL?