What is the problem with this configuration?
You are preparing a lab for a ClusterXL environment, with the following topology:
Vip internal cluster IP = 172.16.10.1; Vip external cluster IP = 192.168.10.3 Cluster Member 1: four NICs, three enabled: qfe0: 192.168.10.1/24, qfe1: 10.10.10.1/24, qfe2: 172.16.10.1/24 Cluster Member 2: five NICs, three enabled; hme0: 192.168.10.2/24, eth1: 10.10.10.2/24, eth2: 172.16.10.2/24 Member Network tab on internal-cluster interface: is 10.10.10.0, 255.255.255.0 SmartCenter Pro Server: 172.16.10.3
External interfaces 192.168.10.1 and 192.168.10.2 connect to a Virtual Local Area Network (VLAN) switch. The upstream router connects to the same VLAN switch. Internal interfaces 10.10.10.1 and
10.10.10.2 connect to a hub. There is no other machine in the 10.10.10.0 network. 172.19.10.0 is the
synchronization network. What is the problem with this configuration?
How do you request a new license for this VPN-1 NGX upgrade?
Your current VPN-1 NG with Application Intelligence (AI) R55 stand-alone VPN-1 Pro Gateway and SmartCenter Server run on SecurePlatform. You plan to implement VPN-1 NGX in a distributed environment, where the existing machine will be the SmartCenter Server, and a new machine will be the VPN-1 Pro Gateway only. You need to migrate the NG with AI R55 SmartCenter Server configuration, including such items as Internal Certificate Authority files, databases, and Security Policies.
How do you request a new license for this VPN-1 NGX upgrade?
a standby SmartCenter Server is automatically synchronized by an active SmartCenter Server, when
By default, a standby SmartCenter Server is automatically synchronized by an active SmartCenter Server, when:
which Check Point QoS feature should you use?
Your network traffic requires preferential treatment by other routers on the network, in addition to the QoS Module, which Check Point QoS feature should you use?
What is a requirement for setting up Management High Availability?
What is a requirement for setting up Management High Availability?
which ONE of the following actions occur?
When you add a resource service to a rule, which ONE of the following actions occur?
how can you check if the new interfaces and associated virtual IP address are recognized by ClusterXL?
After you add new interfaces to this cluster, how can you check if the new interfaces and associated virtual IP address are recognized by ClusterXL?
Which type of service should a Security Administrator use in a Rule Base to control access to specific shared
Which type of service should a Security Administrator use in a Rule Base to control access to specific shared partitions on target machines?
which ClusterXL mode is this?
From the following output of cphaprob state, which ClusterXL mode is this?
How is the Security Gateway VPN Domain created?
The following diagram illustrates how a VPN-1 SecureClient user tries to establish a VPN with hosts in the external_net and internal_net from the Internet. How is the Security Gateway VPN Domain created?