Type the command and syntax to view critical devices on a cluster member in a ClusterXL
environment.

Type the command and syntax to configure the Cluster Control Protocol (CCP) to use
Broadcast.

Fill in the blank. In New Mode HA, the internal cluster IP VIP address is 10.4.8.3. The
internal interfaces on two members are 10.4.8.1 and 10.4.8.2 Internal host 10.4.8.108 pings
10.4.8.3, and receives replies. Review the ARP table from the internal Windows host
10.4.8.108. According to the output, which member is the standby machine?

Fill in the blank. In New Mode HA, the internal cluster IP VIP address is 10.4.8.3. An internal
host 10.4.8.108 successfully pings its Cluster and receives replies. Review the ARP table
from the internal Windows host 10.4.8.108. Based on this information, what is the active
cluster member’s IP address?

Fill in the blank. In Load Sharing Unicast mode, the internal cluster IP address is 10.4.8.3.
The internal interfaces on two members are 10.4.8.1 and 10.4.8.2. Internal host 10.4.8.108
Pings 10.4.8.3, and receives replies. The following is the ARP table from the internal
Windows host 10.4.8.108. Type the IP address of the member serving as the pivot machine
in the space below.

To stop acceleration on a GAiA Security Gateway, enter command:

To bind a NIC to a single processor when using CoreXL on GAiA, you would use the
command

Fill in the blank. To verify SecureXL statistics, you would use the command ________

Fill in the blank. To verify the SecureXL status, you would enter command _____________

Fill in the blank. To enter the router shell, use command __________