Refer to the exhibit.

The exhibit shows the uplink that the blade servers use to reach the data center LAN may carry
traffic from VLAN2.4.6 or 8, or some combination.
A network architect is planning the Virtual Connect configuration. The configuration should allow
the server administration to provision new server ports with the correct VLANs easily. The
customer wants to create a redundant solution for the uplinks in which uplinks in both modules are
used by the server blades to which they are bound.
Based on these needs, what is the correct design for the shared uplink ser (SUS) or SUSs?

A.
One SUS that has multiple networks, for half of the VLANs, and is bound to the uplinks on VC
module 1. A second SUS that has multiple networks. For the other half of the VLANs, and is
bound to the uplinks on VC module2.

B.
On SUS for each VLAN. Half of the SUSs are bound to the uplinks on VC module 1. The other
half of the SUSs are bound to the uplinks on VC module 2.

C.
One SUS has multiple networks, one for each VLAN, and is bound to the uplinks on VC module
1. A different SUS that supports the same VLANs and is bound to the uplinks on VC module 2.

D.
One SUS that has multiple networks, one for each VLAN, and is bound to the uplinks on VC
module 1 as well as to the uplinks on VC module 2.