Which privilege level is indicated by the following prompt at the CLI of an HP E5400 zl Series
switch?
Switch>

You must define an IP interface associated with VLAN 5 on an HP E5400 zl Series switch. Which
parameters are required? (Select two.)

Which Spanning Tree Protocol is enabled when the following command is entered at the CLI of an
HP E5412 zl switch at default settings?
E5412(config)# spanning-tree

Which interface is available for managing A-Series switches at factory default settings?

You must configure VLANs and ports on an HP A7500 switch at default settings. What is the effect
of the following commands?
[SW-Gigabit-Ethernet1/0/1]port link-type trunk[SW-Gigabit-Ethernet1/0/1]port trunk permit
vlan 100 101

Port B24 on an HP E5400 zl Series switch is a tagged member of VLAN 101. Ports B21, B22, and
B23 are at default settings. What is the result of the following command?
Switch(config)# trunk B21-B24 trk1

You have successfully installed an HP PCM+ remote client on a network administrator’s
workstation. Which step is necessary to enable the client to
access the PCM+ server ?

An HP A-Series switch includes the following configuration:

Which VLANs are in instance 0?

At a customer site, you have configured static link aggregation between an HP E8212 zl switch
and an HP E5406 zl switch. The aggregated link includes
two ports on each switch. During testing, traffic analysis reveals that only one of the links is being
used to full capacity. The other link is
operating well below capacity.What is an accurate explanation for this finding?

You must define a hostname on an HP E5400 zl Series switch. Which configuration context must
you enter to perform this task?