DRAG DROP

Place the IRF Master election criteria in their correct priority order.

DRAG DROP

Match each A-Series router with its description.

DRAG DROP
Match each 802.11 standard with its description.

You have entered the following command at the CLI of an HP E5400 zl Series switch. Switch(vlan-1)# ip address 192.168.1.225/24
The switch’s other VLAN and IP parameters are at factory defaults. While testing this
configuration, you find that the switch cannot ping a server located at 192.168.2.22. You have
confirmed the server is up and available. This server is located in a data center not directly
connected to your switch.
What must you configure on the switch to enable connectivity between these two devices?

You must define a hostname on an HP E5400 zl Series switch. Which configuration context must
you enter to perform this task?

What is the effect of the following command entered at the CLI of an HP E5400 zl Series switch at
factory default settings? Switch# exit

What is the effect of the following command entered at the CLI of an HP E3500 yl switch?
E3500(vlan-44)#interface 23

You must configure VLANs and ports on an HP A7500 switch at default settings. What is the effect
of the following commands?
[SW-Gigabit-Ethernet1/0/1]port link-type trunk
[SW-Gigabit-Ethernet1/0/1]port trunk permit vlan 100 101

Which type of port can handle more than one untagged VLAN on an HP A-Series switch?

Which HP E-Series switch features redundant management and fabric modules?