Which need requires the customer to choose the HP 5900CP switch instead of the 5900AF switch?
A customer is deciding whether to purchase a switch in the HP 5900AF Series or the HP
5900CP series Which need requires the customer to choose the HP 5900CP switch instead
of the 5900AF switch?
What can meet the needs for this design?
A company is adding a second data center for disaster recovery. The data centers connect
over a link supplied by a service provider with an IP network. The company wants a solution
that extends Layer 2 connectivity between the data centers and does not require any
special services from the service provider, such as MPLS. What can meet the needs for this
design?
How is the first Telnet interface for A-Series switches identified in the CLI?
How is the first Telnet interface for A-Series switches identified in the CLI?
What explains this behavior?
A network administrator deploys several HP MSM APs and an HP MSM Controller. The APs
discover the controller, establish management tunnels, and become synchronized. The
administrator wants to check some settings on one of the APs and attempts to reach its web
browser interface, but the request times out.
However, a ping to the AP succeeds.
What explains this behavior?
How should the network administrator connect the controller to the corporate LAN?
A company is deploying an HP MSM760 Controller that will control approximately 80 HP MSM
APs. The HP MSM solution will provide wireless guest services and a WLAN for employees, which
is secured with WPA2 and 802.1X.
The controller will perform the following functions:
Handle all guest traffic
Provide DHCP services for guest clients
Force guests to log in through a web page and implement access controls
How should the network administrator connect the controller to the corporate LAN?
What is one step that the network administrator must complete before connecting to the controller on its new I
A network administrator maps a network profile with aVLAN ID 512 to the LAN port of an HP
MSM765zl Mobility Controller The network administrator configures an IP interface for this profile
and intends to contact and manage the controller on this interface.
All other settings remain at default.
What is one step that the network administrator must complete before connecting to the controller
on its new IP address?
What are valid roles for AP 2 and AP 3?
Refer to the exhibit.
A network administrator needs to configure a local mesh between the three APs shown in the
exhibit.
The network administrator configured AP1 for the master role. What are valid roles for AP 2 and
AP 3?
What is the throughput and bandwidth that the clients experience?
HP MSM APs support a VSC that specifies 54 Mbps as the highest supported data rate. Several
clients connect to the WLAN associated with this VSC.
What is the throughput and bandwidth that the clients experience?
Which VSC setting should the MSM administrator plan for this scenario?
A company has an HP MSM solution with an MSM Controller and APs.
The company requires a WLAN that enforces WPA2 with 802.1X authentication. The company
has a RADIUS server that will authenticate wireless users. The RADIUS server administrators
would prefer to define just one RADIUS client on the server. Which VSC setting should the MSM
administrator plan for this scenario?
Which feature should you enable to enhance Layer 2 (L2) roaming?
Which feature should you enable to enhance Layer 2 (L2) roaming?