What is a benefit of the HP Network Protector SDN Application as opposed to a traditional IDS/IPS?
What is a benefit of the HP Network Protector SDN Application as opposed to a traditional IDS/IPS?
What must the network administrator do on interface Ten-GigabitEthernet 1/0/2 to enable this behavior?
Refer to the exhibits.
Exhibit 1
Exhibit 2
The switch and server will transmit Fibre Channel over Ethernet (FCoE) traffic on the Ethernet link. If congestion occurs, the devices should pause the
FCoE transmissions rather than drop them. What must the network administrator do on interface Ten-GigabitEthernet 1/0/2 to enable this behavior?
What is a valid configuration?
An HP Comware switch has four MDCs defined on it. Network administrators need to set up SSH access to each MDC and want to use the
Management-Ethernet interface for that purpose. What is a valid configuration?
Which VLANs are in instance 0?
An HP A-Series switch includes the following configuration: stp region-configuration region-name
hp-enterprise instance 1 vlan 10 to 99 instance 2 vlan 100 to 199 revision-level 0 active region-configuration Which VLANs are in instance 0?
When will the switches in an IRF stack compete to become the Master?
When will the switches in an IRF stack compete to become the Master?
What is the maximum IRF priority you can assign to an HP A-Series switch?
What is the maximum IRF priority you can assign to an HP A-Series switch?
What is indicated by the 2 in this prompt from an HP A5800 switch?
What is indicated by the 2 in this prompt from an HP A5800 switch? [Switch-Gigabit-Ethernet2/0/1]
How does the distributed link aggregation technology used in IRF provide link redundancy?
How does the distributed link aggregation technology used in IRF provide link redundancy?
Which management interfaces enable an administrator to configure a username for access to the manager privileg
Which management interfaces enable an administrator to configure a username for access to the
manager privilege level on an HP E5400 zl Series switch? (Select two.)
Which property must match on the SNMP server and the switches?
You must implement an SNMPv2c solution that will use standard SNMP-Set messages to
configure HP switches. Which property must match on the SNMP server and the switches?