A customer wants to use jumbo frames on an interface group called a0a. Interface group
a0a contains ports e0c and e0d. Additionally, the customer is using VLAN tagging for
VLANs 510 and 520. VLAN 510 will use jumbo frames but VLAN 520 will not. When the
customer tries to enable jumbo frames on a0a-510 the command fails.
What caused the failure?

A.
The MTU size must be set on the broadcast domain to which the ports belong.

B.
The LIF corresponding with VLAN 510 is not configured for jumbo frames.

C.
Ports e0c and e0d have conflicting MTU sizes configured.

D.
Jumbo frames must be enabled from the advanced privilege set.