In this section, you’ll see one or more sets of questions with the same scenario and problem Each question presents a unique solution to the problem, and you must
determine whether the solution meets the stated goals Any of the solutions might solve the problem. It is also possible that none of the solutions solve the problem.
Once you answer a question in this section, you will NOT be able to return to it As a result. these questions will not appear in the review screen
Note This question is part of a series of questions that present the same scenario Each question in the series contains a unique solution Determine whether the
solution meets the stated goals.
Your network contains an Active Directory forest named contoso.com. The forest contains a member server named Server1 that runs Windows Server 2016All
domain controllers run Windows Server 2012 R2
Contoso com has the following configuration
You plan to deploy an Active Directory Federation Services (AD FS) farm on Server1 and to configure device registration You need to configure Active Directory to
support the planned deployment.
Solution You raise the domain functional level to Windows Server 2012R2.
Does this meet the goal?
A.
Yes
B.
No
Correct answer is B. NO. You need atleast one DC with Windows 2016 server if you plan to implement ADFS on Windows server 2016.
1
0
No, you do not need 2016 functional level. 2012R2 will support ADFS with Device Registration, which is the requirement listed in the question.
https://docs.microsoft.com/en-us/windows-server/identity/ad-fs/deployment/configure-a-federation-server-with-device-registration-service
The answer is A: Yes
1
1
You need to run Initialize-ADDeviceRegistration which requires Windows 2012 R2 schema. So, the answer is Yes.
From https://docs.microsoft.com/en-us/powershell/module/adfs/initialize-addeviceregistration?view=win10-ps
The Initialize-ADDeviceRegistration cmdlet initializes the Device Registration Service configuration in the Active Directory forest. To run this cmdlet, you must be logged in with enterprise administrator permissions and your Active Directory forest must have the Windows Server 2012 R2 schema. To join devices to a workplace, you must run the Enable-AdfsDeviceRegistration cmdlet on each Active Directory Federation Services (AD FS) server after this cmdlet has been run successfully.
0
1
The correct answer is: no. You only need to upgrade the Active Directory schema to Server 2016.
When you install/upgrade a Domain Controller Server 2016, you also change the schema, so that would work also.
0
0
2017 New Updated 70-740 PDF Dumps with some new questions(wish more people can participate in questions sharing):
There are some i don’t know answers and wish someone can help me!
QUESTION 63
Note: This question is part of a series of questions that use the same similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have an Active Directory domain that contains two Hyper-V servers named Server1 and Server2.
Server1 has Windows Server 2016 installed. Server2 has Windows Server 2012 R2 installed.
Each Hyper-V server has three network cards. Each network card is connected to a different subnet. Server1 contains a dedicated migration network.
Server2 contains a virtual machine named VM5.
You plan to perform a live migration of VM5 to Server1.
You need to ensure that Server1 uses all available networks to perform the live migration of VM5.
What should you run1?
A. the Mount-VHD cmdlet
B. the Diskpart command
C. the Set-VHD cmdlet
D. the Set-VM cmdlet
E. the Set-VMHost cmdlet
F. the Set-VMProcessor cmdlet
G. the Install-WindowsFeature cmdlet
H. the Optimize-VHD cmdlet
Answer: E
QUESTION 64
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
Start of Repeated Scenario:
A company named Contoso, ltd. has several servers that run Windows Server 2016. Contoso has a Hyper V environment that uses failover clustering and Windows Server Update Services (WSUS). The environment contains several Windows containers and several virtual machines.
The WSUS deployment contains one upstream server that is located on the company’s perimeter network and several downstream servers located on the internal network.
A firewall separates the upstream server from the downstream servers.
You plan to deploy a human resources application to a new server named HRServer5. HRServer5 contains a FAT32-formatted data volume.
The CIO of Contoso identifies the following requirements for the company’s IT department:
– Deploy failover cluster to two new virtual machines.
– Store all application databases by using Encrypted File System (EFS).
– Ensure that each Windows container has a dedicated IP address assigned by a DHCP server.
– Produce a report that lists the processor time used by all of the processes on a server named Server 1 for five hour.
– Encrypt all communication between the internal network and the perimeter network, including all WSUS communications.
– Automatically load balance the virtual machines hosted in the Hyper-V cluster when processor utilization exceeds 70 percent.
End of Repeated Scenario.
What should you do to prepare the data volume on HRServer5 to store the databases required for the human resources application?
A. Format the data volume by using ReFS.
B. Enable Trusted Platform Module (TPM) on HRServer5.
C. Format the data volume by using NTFS.
D. Enable BitLocker Drive Encryption (BitLocker) on the data volume.
Answer: D
QUESTION 65
Drag and Drop Question
You have a physical server named Server1 that runs Windows Server 2016 Server1 is a Hyper-V host
On Server1, you create a virtual machine named VM1 that runs Windows Server 2016.
You plan to install the Hyper-V server role on VM1.
You need to ensure that you can configure VM1 to host virtual machines.
How should you complete the Windows PowerShell script? To answer, drag the appropriate values to the correct targets. Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
QUESTION 66
Drag and Drop Question
You are planning the configuration of a virtual network switch for a Hyper V environment. The environment will contain the following Hyper V hosts.
– A server named Server1 will have 10 virtual machines that must be able to communicate with each other. The virtual machines must be prevented from communicating with Server1 and all other servers on the corporate network.
– A two-node failover cluster named Cluseter1 will have 20 virtual machines. The virtual machines will run on both nodes. Hyper V hosts on the corporate network must be able to connect to the virtual machines.
Which type of virtual switch should you select for each Hyper V host? To answer, drag the appropriate virtual switch types to the correct hosts Each virtual switch type may be used once, more than once, or not at all.
Answer:
QUESTION 67
Hotspot Question
Your network contains an Active Directory forest. The forest contains one domain named contoso.com.
The domain contains two domain controllers named DC1 and DC2. DC1 holds all of the operations master roles.
During normal network operations, you run the following commands on DC2:
Move-ADDirectoryServerOperationMasterRole -Identity “DC2” -OperationMasterRole PDCEmulator
Move-ADDirectoryServerOperationMasterRole -Identity “DC2” -OperationMasterRole RIDMaster DC1 fails.
You remove DC1 from the network, and then you run the following command:
Move-ADDirectoryServerOperationMasterRole -Identity “DC2” -OperationMasterRole SchemaMaster
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
Answer:
QUESTION 68
Drag and Drop Question
You have a network that contains several servers that run Windows Server 2016.
You need to use Desired State Configuration (DSC) to configure the servers to meet the following requirements:
– Install the Web Server server role
– Start the World Wide Web Publishing service
How should you configure the DSC resources? To answer, drag the appropriate values to the correct locations Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
QUESTION 69
Hotspot Question
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
Start of Repeated Scenario:
A company named Contoso, ltd. has several servers that run Windows Server 2016 Contoso has a Hyper V environment that uses failover clustering and Windows Server Update Services (WSUS). The environment contains several Windows containers and several virtual machines.
The WSUS deployment contains one upstream server that is located on the company’s perimeter network and several downstream servers located on the internal network.
A firewall separates the upstream server from the downstream servers.
You plan to deploy a human resources application to a new server named HRServer5. HRServer5 contains a FAT32-formatted data volume.
The CIO of Contoso identifies the following requirements for the company’s IT department:
– Deploy failover cluster to two new virtual machines.
– Store all application databases by using Encrypted File System (EFS).
– Ensure that each Windows container has a dedicated IP address assigned by a DHCP server
– Produce a report that lists the processor time used by all of the processes on a server named Server 1 for five hour.
– Encrypt all communication between the internal network and the perimeter network, including all WSUS communications.
– Automatically load balance the virtual machines hosted in the Hyper-V cluster when processor utilization exceeds 70 percent.
End of Repeated Scenario.
You need to create a Data Collector Set to meet the requirement for the processor time report.
What command should you run to create the Data Collector Set? To answer, select the appropriate options in the answer area.
Answer:
https://drive.google.com/drive/folders/0B75b5xYLjSSNYXZ2ZlFjOHRhREU?usp=sharing
1
1