You have been asked to establish reachability between Router 1’s and Router 2’s loopback addresses as
shown in the exhibit.
Which two steps will accomplish this task? (Choose two.)

— Exhibit —
user@router# run show route /24
inet.0: 142 destinations, 142 routes (141 active, 0 holddown, 1 hidden)
+ = Active Route, – = Last Active, * = Both
/24 *[OSPF/10] 04:10:20
>to 172.25.213.11 via ge-1/0/1.0
to 172.25.213.23 via ge-1/0/2.0
— Exhibit —
In the exhibit, what does the (>) symbol indicate?

— Exhibit —
traceroute to 10.1.15.2 (10.1.15.2), 30 hops max, 40 byte packets
1 10.1.36.1 (10.1.36.1) 0.651 ms 7.834 ms 0.506 ms
2 10.1.23.1 (10.1.23.1) 0.5 ms 0.5 ms 0.5 ms
3 * * *
4 * * *
— Exhibit –Referring to the exhibit, which statement is correct?

— Exhibit —
[editsnmp]
user@router# show
communityCommunityA {
authorization read-only;
clients {
192.168.1.0/28;
}
}
trap-groupgroupA {
categories {
link;
}
targets {
192.168.100.1;
192.168.200.1;
}
}
— Exhibit —
Referring to the exhibit, what is the purpose of the targets section of the configuration?

— Exhibit —
interfaces {
ge-0/0/8 {
unit 0 {
family inet {
address 192.168.1.1/24;
}
}
}
ge-0/0/9 {
unit 0 {
family inet {
address 192.168.10.1/24;
}
}
}
}
— Exhibit —
Referring to the exhibit, which command would you use to add an additional address to the ge-0/0/9.0
interface?

— Exhibit —
user@router# run show interfaces terse
Interface Admin Link Proto Localfe-0/0/0 up up
fe-0/0/0.0 up upinet 10.0.39.2/24
iso
mpls
fe-0/0/1 up up
fe-0/0/1.0 up upinet 10.0.18.2/24
fe-0/0/1.5 down up inet 10.0.19.2/24
— Exhibit —
An administrator is unable to ping any address on the 10.0.19.0/24 subnet. To identify the problem, the
administrator uses the command shown in the exhibit.
Which step should be taken to solve the problem?

You have been asked to use a 23-bit network mask to segment the network block 209.18.12.0.
How many usable host addresses will there be per subnet?

You have been allocated a /22 network.
How many usable hosts are available?

What are the usable hosts on the .128.0/19 network?

You must segment your internal /24 network into a minimum of 12 subnets, each containing a minimum of 12
hosts.
Which network mask do you use?