What information does the help topic command provide?

Which of the following commands will configure the maximum transmission unit size of a fast Ethernet
interface?

After factory-defaults have been loaded, which two syslog files will be present in the configuration?

Which two are correct when configuring an IP address for a Fast Ethernet interface? (Choose two.)

What are the usable hosts on the 192.168.1.24/29 network?

— Exhibit —
user@router> show route protocol static
inet.0: 12 destinations, 12 routes (12 active, 0 holddown, 0 hidden)
+ = Active Route, – = Last Active, * = Both
192.168.1.0/24 *[Static/5] 00:03:13
>to 10.20.106.10 via fe-0/0/5.1
192.168.1.192/26 *[Static/5] 00:03:13
>to 10.20.14.131 via ge-0/0/0.0
192.168.1.192/27 *[Static/5] 00:03:13
>to 10.18.1.1 via ge-0/0/1.0
192.168.1.4/30 *[Static/5] 00:01:06
>to 10.20.14.130 via ge-0/0/0.0
— Exhibit —
Using the routing table shown in the exhibit, what will be the next-hop IP address used for a destination IP
address of 192.168.1.1? (Assume that the only routes to this destination are static routes.)

— Exhibit —
user@router> show route protocol static
inet.0: 12 destinations, 12 routes (12 active, 0 holddown, 0 hidden)
+ = Active Route, – = Last Active, * = Both
192.168.1.128/27 *[Static/5] 00:03:13
>to 10.20.106.10 via fe-0/0/5.1
192.168.1.144/29 *[Static/5] 00:03:13
>to 10.20.14.131 via ge-0/0/0.0
192.168.1.192/27 *[Static/5] 00:03:13>to 10.18.1.1 via ge-0/0/1.0
192.168.1.128/28 *[Static/5] 00:01:06
>to 10.20.14.130 via ge-0/0/0.0
— Exhibit —
Given the routing entries shown in the exhibit, which next-hop IP address will be used for the destination IP
address 192.168.1.159? (Assume that only static routes are available for the destination.)

— Exhibit —
user@router> show route protocol static
inet.0: 12 destinations, 12 routes (12 active, 0 holddown, 0 hidden)
+ = Active Route, – = Last Active, * = Both
192.168.1.128/27 *[Static/5] 00:03:13
>to 10.20.106.10 via fe-0/0/5.1
192.168.1.144/29 *[Static/5] 00:03:13
>to 10.20.14.131 via ge-0/0/0.0
192.168.1.192/27 *[Static/5] 00:03:13
>to 10.18.1.1 via ge-0/0/1.0
192.168.1.128/28 *[Static/5] 00:01:06
>to 10.20.14.130 via ge-0/0/0.0
— Exhibit —
Given the routing entries shown in the exhibit, which next-hop IP address will be used for the destination IP
address 192.168.1.142? (Assume that only static routes are available for the destination.)

— Exhibit —
[edit class-of-service]
user@router# show
interfaces {
ge-0/0/2 {
unit 0 {
classifiers {
inet-precedence default;
}
}
}
}
— Exhibit —
Referring to the exhibit, which type of classifier is being used in this CoS configuration?

— Exhibit —
[edit firewall family inet filter COS-CLASSIFIER]
user@router# show
term MANAGER {
from {
source-address {
192.168.200.0/25;
}
destination-address {
100.100.100.1/32;
}}
then {
forwarding-class expedited-forwarding;
accept;
}
}
term ALL-OTHER-TRAFFIC {
then accept;
}
[edit interfaces ge-0/0/1]
user@router# show
unit 0 {
familyinet {
filter {
input COS-CLASSIFIER;
}
address 192.168.200.1/24;
}
}
— Exhibit —
Referring to the exhibit, which type of classifier is being used in this CoS configuration?