You have configured Open Replicator between a new VMAX3 array and an older Symmetrix. A host is
connected to the VMAX3 array and a control device is configured to pull data from a remote device. You want
the host to be able to access data on the control device while a Hot Pull session is active.
How many ports on the VMAX3 array must be zoned to the remote array?
A.
1
B.
2
C.
3
D.
4
Explanation:
http://microstare.com/learning/migration/Open%20Replicator.htm
The Correct answer is B.2
2
4
A is correct.
The SAN for the remote storage array must have connectivity to the control Symmetrix SAN. Open Replicator requires that at least one port on the remote array that allows access to the remote device have access to the control device through at least one port for a cold copy and all ports for a hot copy on the control array.
0
0
◆ A Fibre Channel switch is required for Open Replicator. Direct connections (such as arbitrated loop) are not supported.
◆ The SAN for the remote storage array must have connectivity to the control Symmetrix SAN. Open Replicator requires that at least ONE port on the remote array, that allows access to the remote device, have access to the control device through at least ONE port for a cold copy and all ports for a hot copy on the control array.
0
0