Which statement Is correct regarding the DR election process In this OSPF implementation?
A.
Both the CE5 and PE6 routers are DROTHERs
B.
PE5 is the OSPFv2 DR for the GigabitEthernet link between PE5 and PE6
C.
PE6 is the OSPFv2 and OSPFv3 DR for the GigabitEthernet link between PE5 and PE6
D.
PE6 is the DR for the GigabitEthernet link between PE5 and PE6 because it has a higher
OSPF priority
Explanation:
# show ip ospf neighbor
# show ipv6 ospf neighbor
http://www.cisco.com/c/en/us/td/docs/ios_xr_sw/iosxr_r3-7/routing/command/reference/rr37ospf.html#wp1003322
RP/0/RP0/CPU0:router# show ospf neighbor
Neighbors for OSPF
Neighbor ID Pri State Dead Time Address Interface
192.168.199.137 1 FULL/DR 0:00:31 172.31.80.37 POS 0/3/0/2
Neighbor is up for 18:45:22
192.168.48.1 1 FULL/DROTHER 0:00:33 192.168.48.1 POS 0/3/0/3
Neighbor is up for 18:45:30
0
0
http://www.cisco.com/c/en/us/td/docs/ios_xr_sw/iosxr_r3-7/routing/command/reference/rr37osp3.html#wp1012515
RP/0/RP0/CPU0:router# show ospfv3 neighbor
Neighbors for OSPFv3 1
Neighbor ID Pri State Dead Time Interface ID Interface
10.0.0.207 1 FULL/ – 00:00:35 3 POS 0/3/0/0
Neighbor is up for 01:08:05
10.0.0.207 1 FULL/DR 00:00:35 2 Ethernet0/0/0/0
Neighbor is up for 01:08:05
0
0
# show ip ospf neighbor
# show ipv6 ospf neighbor
# show ip[v6] ospf interface
0
0