On Cisco IOS XR Software, which set of commands is used to enable the gi0/0/0/1 interface for OSPF
in area 0?

A.
interface gi0/0/0/0
ip address 10.1.1.1 255.255.255.0
!
router ospf 1
network 10.1.1.1 0.0.0.0 area 0

B.
interface gi0/0/0/0
ip address 10.1.1.1 255.255.255.0
!
router ospf 1
network 10.1.1.1 255.255.255.255 area 0

C.
router ospf 1
area 0
interface GigabitEthernet0/0/0/1

D.
interface gi0/0/0/0
ip address 10.1.1.1 255.255.255.0
ip ospf 1 area 0

E.
router ospf 1
address-family ipv4 unicast
interface GigabitEthernet0/0/0/1 area 0

F.
router ospf 1
address-family ipv4 unicast
interface GigabitEthernet0/0/0/1
area 0