You have been asked to install and configure a new switch in a customer network. Use the console access to the existing and new switches to configure and verify
correct device configuration.

Refer to the configuration. For which configured VLAN are untagged frames sent over trunk between SW1 and SW2?

A.
VLAN1

B.
VLAN 99

C.
VLAN 999

D.
VLAN 40

E.
VLAN 50

F.
VLAN 200

G.
VLAN 300

Explanation:
The native VLAN is used for untagged frames sent along a trunk. By issuing the “show interface trunk” command on SW1 and SW2 we see the native VLAN is 99.